Read Sony SAL135F18Z Service Manual online
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
HELP11
Adhesive bond (B-10): J-6082-612-A
1.
Confirm that the F-ECD flexible and the FH button main flexible come out of holes of focus hold barrel block respectively. If not, re-
install the focus hold barrel block. (Refer to HELP12.)
2.
Install the PWB flexible main assy and tighten two screws to fix it.
3.
Apply the adhesive bond (B-10) to the heads of screws.
4.
Connect the F-ECD flexible and FH button main flexible to the connectors of main board.
Note:
• To prevent the wire cutting from occurring, bend the flexible board perpendicularly.
• After connecting, confirm that the connector is securely locked.
FH Button Main Flexible
F-ECD Flexible
Focus Hold Barrel Block
FH Button Main Flexible
Connector
Contact Flexible
Connector
Main Flexible
F-ECD Flexible
Focus Hold Barrel Block
Screw
(Apply the adhesive bond (B-10))
(Apply the adhesive bond (B-10))
Screw
(Apply the adhesive bond (B-10))
(Apply the adhesive bond (B-10))
Click on the first or last page to see other SAL135F18Z service manuals if exist.