Read Sony SAL135F18Z Service Manual online
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
3.
Rotate counterclockwise the iris control lever of iris block inside the lens with tweezers so that the opening of iris becomes minimam.
4.
While inserting the groove at the tip of function lever in the iris control lever of iris block of iris inside the lens, install the function
lever to the preset ring and fix it tentatively in the center of oblong hole with two screws. (Use the special driver: J-6082-654-A)
Note:
After installing the function lever, confirm that the iris opens and closes when the lever of preset ring is turned.
5.
Adjust the aperture diameter. (Refer to 4-2.)
6.
After adjust the aperture diameter, apply the adhesive bond (B-10) to the tip of screws.
Iris Control Lever
Iris becomes minimam
Rear Ring Assy
Screws
Iris Control Lever
Function Lever
Oblong holes
Click on the first or last page to see other SAL135F18Z service manuals if exist.