Read Sony SAL135F18Z Service Manual online
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
3.
Align four holes of FB adjustment washers with holes for screws.
4.
While inserting the head of coupler in the holes for coupler installation, install the mount block to the lens. Apply the adhesive bond
(B-40) to the screwed portions of screws. Then, tighten four screws to fix the mount block.
Note:
• Before installing the mount block, confirm that the white coupler receive is inserted in the hole for coupler installation.
• After tightening the screws, confirm that the coupler rotates when the focus ring is rotated.
Mount Block
Coupler
Coupler Receive
Holes for coupler installation
Screws
(Apply the adhesive bond
(B-40))
(Apply the adhesive bond
(B-40))
Screws
(Apply the adhesive bond
(B-40))
(Apply the adhesive bond
(B-40))
Click on the first or last page to see other SAL135F18Z service manuals if exist.