DSC-W1, DSC-W12 (serv.man12) - Sony Digital Camera Service Manual (repair manual). Page 5

DSC-W1/W12

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. LCD Initial Data Input
3. VCO Adj.
4. Contrast Adj.
5. V-COM Adj.
6. White Balance Adj.
7. Release of Data Setting during LCD Adj.

[Adjusting method]
1) Select the LCD type with the LCD Type Select radio button.
2) Click the 

[LCD Adjustment Start]

 button.

3) The Automatic Adjustment Program executes the items from

“1. Data Setting during LCD Adj.” to “4. Contrast Adj.”.

4) Upon successful completion of the “4. Contrast Adj.”, the fol-

lowing message is displayed during execution in “5. V-COM
Adj.”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the 

[OK]

 button.

5) Upon completion of “5. V-COM Adj.”, “6. White Balance Adj.”

is executed. The following message is displayed, and then check
that LCD screen is not colored.
If colored, change the data of page: 8F, address: 28 and 2A on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.

6) If the 

[OK]

 button is clicked, “7. Release of Data Setting dur-

ing LCD Adj.” will be executed.

7) Upon successful completion of all items of the LCD adjust-

ment, the following message is displayed. Click the 

[OK]

 but-

ton.

UP/DOWN key

A

A

A

A

B

B

B

B