Read Sony DSC-W180 / DSC-W190 (serv.man2) Service Manual online
SECTION 5
ADJUSTMENTS
Revision History
Revision History
Sony EMCS Co.
ADJ
Ver. 1.1 2009.08
9-852-697-52
2009H0800-1
© 2009.08
Published by Tokai TEC
DSC-W180/W190_ADJ
DSC-W180/W190
Far Focus Adjustment
WB/ISO Adjustment
Zoom Adjustment
Set Lang Destination
Near Focus Adjustment
MS/BP Adjustment
Introduction
CAMERA SECTION ADJUSTMENTS
Product ID List
Link (English)
List of Service Tools and Equipments
Connecting the Equipments
Handling of Adjusting Firmware
Adjustment Items When Replacing CCD Block
and Lens Block and Main Board
and Lens Block and Main Board
BEFORE STARTING ADJUSTMENTS
Link (English)
遠距離フォーカス調整
WB/ISO調整
ズーム調整
言語仕向設定
近距離フォーカス調整
MS/BP調整
はじめに
カメラ部調整
プロダクトID表
Link (Japanese)
サービス用治具・機器一覧
機器の接続
調整用ファームウェアの取り扱い
CCD ブロック、レンズブロック、
メイン基板交換後の調整項目
メイン基板交換後の調整項目
調整を始める前に
Link (Japanese)
5-1
DSC-W180/W190_ADJ
ENGLISH
JAPANESE
ENGLISH
JAPANESE
SECTION 5 ADJUSTMENTS
5-1. BEFORE STARTING ADJUSTMENTS
5-1-1. Adjustment Items When Replacing CCD Block and Lens Block and Main Board
When replacing these parts, adjust the items indicated by “z” in the following table.
CCD block
Lens block
Replaced Parts
Adjustment
MS/BP Adjustment
WB/ISO Adjustment
Zoom Adjustment
Far Focus Adjustment
Near Focus Adjustment
Set Lang Destination
Main board
Table 5-1-1
5-1-2. List of Service Tools and Equipments
J-5
Small pattern box
PTB-1450
J-6082-557-A
PTB-1450
J-6082-557-A
J-3
J-4
Chart
(Note)
(Note)
J-6
Mini flange back jig
J-6082-719-A
or
Flange back
adjustment jig
J-6082-563-A
J-6082-719-A
or
Flange back
adjustment jig
J-6082-563-A
Camera table
J-6082-384-A
J-6082-384-A
J-1
SONY
Memory Stick PRO Duo
(256 MB or more)
Memory Stick PRO Duo
(256 MB or more)
AC power adaptor
(AC-LS5)
1-479-284-51
(AC-LS5)
1-479-284-51
J-2
Fig. 5-1-1
Note:
For the chart, search “J-6082-563-A” in the JIG & Software on ESI homepage, download the PDF file and print out it on the A4 size white
paper.
paper.
5-2
DSC-W180/W190_ADJ
ENGLISH
JAPANESE
ENGLISH
JAPANESE
5-1-4. Handling of Adjusting Firmware
Note 1:
Save the adjusting firmware file in the root directory of Memory Stick PRO Duo.
Saving it in the other directory causes the malfunction of program.
Saving it in the other directory causes the malfunction of program.
Note 2:
The adjusting firmware file is downloadable from the ESI homepage.
Preparations:
First, format the Memory Stick PRO Duo before copying the adjusting firmware.
When formatting, perform on the PC, using the FAT. Do not format on the unit.
If the concealed file “MEMSTICK.IND” exists, delete it.
Decompress the downloaded file and confirm the file format as shown below.
When formatting, perform on the PC, using the FAT. Do not format on the unit.
If the concealed file “MEMSTICK.IND” exists, delete it.
Decompress the downloaded file and confirm the file format as shown below.
Adjusting firmware file for DSC-W180:
SDMA350C.bin
Adjusting firmware file for DSC-W190:
SDMC350C.bin
Save the file in the root directory of Memory Stick PRO Duo.
And also save the file of “lang.txt” in the root directory Memory Stick PRO Duo when replacing main board.
Refer to [5-2-7. Set Lang Destination] for “lang.txt”.
And also save the file of “lang.txt” in the root directory Memory Stick PRO Duo when replacing main board.
Refer to [5-2-7. Set Lang Destination] for “lang.txt”.
Adjustment mode:
1. With the camera turned OFF, set the Mode switch to “
(Still image)” and insert the Memory Stick PRO Duo with the adjusting
firmware files into the Memory Stick slot of the camera.
2. While pressing the “
(Delete)” button, press the ON/OFF (Power) button and release when the ON/OFF (Power) lamp and the LCD
display turns on. Release the “
(Delete)” button when the ON/OFF (Power) lamp and the LCD display goes out.
3. After a few seconds, the LCD display will turn white and then show the Adjustment mode screen.
Pushing “MENU” button, the adjustment is finished makes to return to the initial screen display for adjustments.
In case of adjusting continuously, go to the next step with above mentioned operation.
Changing the Mode switch will take you out of the Adjustment mode.
When all adjustments are completed, just simply remove the power from the unit completes the adjustment procedure.
In case of adjusting continuously, go to the next step with above mentioned operation.
Changing the Mode switch will take you out of the Adjustment mode.
When all adjustments are completed, just simply remove the power from the unit completes the adjustment procedure.
5-1-3. Connecting the Equipments
Connect the equipments as shown below.
Fig. 5-1-2
To wall outlet
Power cord
AC power adaptor
AC-LS5 (Sold separately)
(1-479-284-51)
AC-LS5 (Sold separately)
(1-479-284-51)
Memory Stick PRO Duo
(256 MB or more)
(256 MB or more)
5-3
DSC-W180/W190_ADJ
ENGLISH
JAPANESE
ENGLISH
JAPANESE
5-2. CAMERA SECTION ADJUSTMENTS
5-2-1. Introduction
After CCD block, Lens block or Main board replacement, perform adjustments to operate the camera.
Followings are keys and functions used in the adjustments. (Fig. 5-2-1)
Followings are keys and functions used in the adjustments. (Fig. 5-2-1)
The initial screen for the adjustment mode is as follows. (Fig. 5-2-2)
Fig. 5-2-1
Fig. 5-2-2
Key
OK: WB/ISO Adjust
Key
Down: Zoom Adjust
Key Left: Far Focus Adjust
Key
Key
Right: Near Focus Adjst
Up: MS/BP Adjust
Key
Key
S1: Set Lang Destination
button: Key Up
Control button
Shutter button: Key S1
button: Key Right
button: Key Down
button: Key Left
(Delete) button
ON/OFF (Power) button
MENU button
button: Key OK
Mode switch
Still image
