Read Sony DSC-R1 (serv.man4) Service Manual online
6-32
DSC-R1_ADJ
1-6.
EVF SYSTEM ADJUSTMENTS
1-6-1.
Function of Each Button on EVF System
Adjustment Screen
Adjustment Screen
Click the
[EVF SYSTEM ADJUSTMENT]
button on the Main
Menu screen, and the “EVF SYSTEM ADJUSTMENT” screen in
Fig. 6-1-78 will appear.
Fig. 6-1-78 will appear.
Fig. 6-1-78
1
[To Menu]
button
The Main Menu screen comes back.
2
[Start]
button
“EVF Adjustment” starts.
3
[Reset]
button
This button functions same as the Reset button of the camera.
4
[Release Data Setting]
button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the EVF adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the EVF adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
1-6-2.
Adjustment Items of EVF System Adjustment
The adjustment items of EVF system adjustment are as listed in
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items if the EVF Adjustment Start button is clicked.
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items if the EVF Adjustment Start button is clicked.
Button
Adjustment
Signal
Page
Address
Name
EVF
VCO adj.
8F
73
Adjustment
Contrast adj.
Arbitrary
8F
7C
White Balance adj.
8F
78, 7A
Table 6-1-5
4
3
2
1
1-6-3.
Adjusting Method
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during EVF Adj.
2. VCO Adj.
3. Contrast Adj.
4. White Balance Adj.
5. Release of Data Setting during EVF Adj.
sequence]
1. Data Setting during EVF Adj.
2. VCO Adj.
3. Contrast Adj.
4. White Balance Adj.
5. Release of Data Setting during EVF Adj.
[Adjusting method]
1) Click the
1) Click the
[Start]
button of the EVF Adjustment.
2) The Automatic Adjustment Program executes the items from
“1. Data Setting during EVF Adj.” to “3. Contrast Adj.”
3) Upon successful completion of the “3. Contrast Adj.”, “4.
White Balance Adj.” is executed. The following message is
displayed, and then check that EVF screen is not colored.
If colored, change the data of page: 8F, address: 78 and 77 on
the SEUS Operation screen to adjust so that the EVF screen is
not colored.
displayed, and then check that EVF screen is not colored.
If colored, change the data of page: 8F, address: 78 and 77 on
the SEUS Operation screen to adjust so that the EVF screen is
not colored.
Fig. 6-1-79
4) If the
[OK]
button is clicked, “3. Release of Data Setting dur-
ing EVF Adj.” will be executed.
5) Upon successful completion of all item the EVF Adjustment,
the following message is displayed. Click the
[OK]
button.
Fig. 6-1-80
Click on the first or last page to see other DSC-R1 (serv.man4) service manuals if exist.