DSC-KW1, DSC-KW11 - Sony Digital Camera Service Manual (repair manual). Page 28

4-11

DSC-KW1/KW11

Adjustment order

Screen display

OK: The adjustment is finished normally.

Led 1300

R Gain
G Gain
B Gain

457

MEAN G

753

256
572

a

FINISH.

103

OK

Moving

The adjustment is complete.

NG: The adjustment is finished abnormally.

Led 1300

R Gain
G Gain
B Gain

256

MEAN G

1058

256
220

a

CaliEr

103

NG

Moving

Malfunction of Flash WB 
adjustment

The Flash WB (White Balance with AF assist light) Adjustment order is as follows.

Note:
Perform the Flash WB Adjustment after those performed in 4-3-2 to 4-3-5.

Confirm the indication

on the screen.

In case of the adjustment is finished abnormally,
the following indication appears on the screen. 
(Fig. 4-3-19) 
In this case, confirm the adjusting environment 
and readjust.

n

Touch the Up, Down, Right or Left key to change selected item. Choose “FLASH WB”, 
touch the Set key, select “OK”, and touch the Set key to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)

In case of the adjustment is finished normally, 
the adjustment completion indication appears 
on the screen. (Fig. 4-3-18)
Press the “Shutter” button to return to 
adjustment menu.

Check that the camera is on the adjustment mode.

* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).

Place the camera in front of the Flash Adjustment Box. (Fig. 4-3-17)

Finished normally.

Finished abnormally.