DSC-KW1, DSC-KW11 - Sony Digital Camera Service Manual (repair manual). Page 32

4-15

DSC-KW1/KW11

This item is to check/calibrate the white balance of OLED panel within a predetermined range.

•  Gray chart files (DSC00001.JPG, DSC00002.JPG)

•  Monitor Brightness in user menu: level 4 (default setting)
•  Store the gray chart files to the [101MSDCF] folder in the [DCIM] folder of the Memory card.

Checking order
1)  Playback the gray chart files.

2)   Check that the display is not colored (reddish or bluish).

3)  If not colored, this item is the end. If colored, proceed to the Calibration order.

Calibration order
1)  Check that the camera is on the adjustment mode.

 Note:
 

For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).

2)  Touch the Up, Down, Right or Left key to change selected item. Choose “TEST”, touch the Set key, and select “OK”. (Fig. 4-3-26) 
 

And touch the Set key to switch the display to Fig. 4-3-27.

 

1.0000

A0E6V3000137

Index : 01

TEST

V

BACKUP

RESTORE

UPDATE_TUPFW

TEST

OK

NO

 

⇨

 

RGB Reset

NR

LCD R

000000

000000

000000

000020

000020

000020

LCD B

LCD G

AutoScenelcoNR

3)  Change the value scales of “LCD_R (Fig.4-3-28)” and “LCD_B (Fig.4-3-29)” accordingly with using the Up, Down, Right or Left key.

 Note:
 

The value scales can be changed from “000000” to “000040” (default “000020”).

 

Do not change the value “000020” of “LCD_G”.

 

RGB Reset

NR

LCD R

000000

000000

000000

000020

000020

000020

LCD B

LCD G

AutoScenelcoNR

 

⇨

 

RGB Reset

NR

LCD R

000000

000000

000000

000020

000020

000020

LCD B

LCD G

AutoScenelcoNR

4)   After changing, press the “Shutter” button, then press the “ON/OFF (Power)” button to turn off the camera once.

5)   Check that the display is not colored according to the above Checking order. 
 

If colored, repeat the procedure from 1) to 4).