Read Sony DSC-G3 (serv.man3) Service Manual online
6-26
DSC-G3_ADJ
1-7.
LCD SYSTEM ADJUSTMENTS
1-7-1.
Function of Each Button on LCD System
Adjustment Screen
Adjustment Screen
Click the [LCD SYSTEM ADJUSTMENT] button on the Main Menu
screen, and the “LCD SYSTEM ADJUSTMENT” screen in Fig.
6-1-24 will appear.
screen, and the “LCD SYSTEM ADJUSTMENT” screen in Fig.
6-1-24 will appear.
Fig. 6-1-24
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
[Start] button
Each adjustment “LCD Adjustment” or “Touch Panel Adjust-
ment” starts.
Each adjustment “LCD Adjustment” or “Touch Panel Adjust-
ment” starts.
3
[Reboot] button
When this button is clicked, the camera is rebooted.
When this button is clicked, the camera is rebooted.
1-7-2.
Adjustment Items of LCD System Adjustment
The adjustment items of LCD system adjustment are as listed in
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Note:
The adjustment data cannot be read or written the SeusEX.
Table 6-1-5
3
2
1
Block
Page
Address
Touch
Panel
Adjustment
Panel
Adjustment
Touch Panel Adj.
Button
Name
Adjustment
Adjusting Address
(Note)
LCD
Adjustment
Adjustment
White Balance
Adj.
Adj.
11
60
0409, 040A
1-7-3.
Adjusting Method
1.
LCD Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. White Balance Adj.
sequence]
1. Data Setting during LCD Adj.
2. White Balance Adj.
[Adjusting method]
1) Click the [Start] button of the LCD Adjustment.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start] button of the LCD Adjustment.
2) The Automatic Adjustment Program executes “1. Data Setting
during LCD Adj.”.
3) Upon successful completion of the “1. Data Setting during LCD
Adj.”, the following screen is displayed during the execution
of “2. White Balance Adj.”. Check that the LCD screen is not
colored. If colored, using the [Up]/[Down] button on the screen,
adjust so that the LCD screen is not colored. After the adjust-
ment, click the [End] button in the screen.
of “2. White Balance Adj.”. Check that the LCD screen is not
colored. If colored, using the [Up]/[Down] button on the screen,
adjust so that the LCD screen is not colored. After the adjust-
ment, click the [End] button in the screen.
4) Upon successful completion of all item the LCD Adjustment,
the following message is displayed. Click the [OK] button.
Click on the first or last page to see other DSC-G3 (serv.man3) service manuals if exist.