XAV-68BT - Sony Car Audio Service Manual (repair manual). Page 5

2.  The following screen is displayed and the destination setting 

mode becomes effective.

 

(Displayed characters/values in the following fi gure are ex-
ample)

Note: Refer to following “2-2. Entering the Destination Code” for opera-

tion method.

<DESTINATION SETTING MODE>

0

  0   0   0   0   1

E U R :   0 0 0 0 0 0

E 1 7 :   0 0 0 0 1 2

R U 2 :   0 0 0 0 0 4

E A :   0 0 0 0 1 A

U C :   0 0 0 0 0 1

E :   0 0 0 0 0 3

I N :   0 0 0 0 1 5

E T 4 :   0 0 0 0 1 C

3.  The resetting operation is executed by pressing the [ENTER] 

button on the remote commander the setting ends, and the unit 
returns to the normal condition.

Note 1: Input of the destination code cannot be performed by the keys of 

main unit. Be sure to input the destination code by remote com-
mander.

2: The ten key cannot be used.

1. Press 

the 

[V] or [v] button, and select the alphanumeric char-

acter of “0 to F”.

2.  The digit advances by pressing the [b] button.
 

The digit returns by pressing the [B] button.

3.  The setting is completed by pressing the [ENTER] button, and 

the initialization operation is done.

AEP and UK models

000000

US and Canadian models

000001

E (NTSC) model

000003

E (PAL) model

000012

Saudi Arabia model

00001A

Indian model

000015

Australian model

00001C

Russian model

000004

3. Confi rmation After Destination Setting
Execute the following operation after completing the destination 
setting, and confi rm a correct destination was set.

Destination setting checking method:
1.  In the state of source off (Home screen is displayed), enter the 

test mode by pressing the buttons on the remote commander in 
order of the [4] 

t [5] t [0] (press only the [0] button for two 

seconds).

2.  The following screen is displayed and confi rm that item of the 

destination has been rewritten correctly.

 

(Displayed characters/values in the following fi gure  are  ex-
ample)

<Test Mode>

  1.AUDIO FACTORY MODE

  2.AUDIO DEBUG MODE

  4.VISUAL FACTORY MODE

  6.DESTINATION SETTING MODE

DEST: UC     REGION: 1    PAN ID: AA2C43FD
MCU: SONY-ST02-140515
Graphic: SONY-TW02-140514
Mecha: SONY-SP02-140514
Servo: HI6CD1-BBA-893D
BT: H10077-V2R78-20001 / SONY:XAV-68BT

3.  The resetting operation is executed by pressing the [ENTER] 

button on the remote commander the confi rming ends, and the 
unit returns to the normal condition.

4.  Processing  After the Destination Setting
Be sure to unsolder the SL001 on the MAIN board after doing the 
destination setting.