Read Sony WX-800UI Service Manual online
WX-800UI
9
Installation
Before installing the unit, remove the bracket
from the unit.
1
Insert both release keys
until they
click, and pull down the bracket
, then
pull up the unit to separate.
When mounting in a Japanese car, see “Mounting
the unit in a Japanese car”.
the unit in a Japanese car”.
Mounting the unit with the supplied
bracket
bracket
Before installing, make sure the catches on both
sides of the bracket
sides of the bracket
are bent inwards 3.5 mm
(
5
/
32
in).
1
Position the bracket
inside the
dashboard, then bend the claws outward
for a tight fit.
for a tight fit.
Removing the bracket
Mounting the unit in the dashboard
Face the hook inwards.
Larger than
182 mm (7
182 mm (7
1
/
4
in)
Larger than
111 mm
(4
111 mm
(4
3
/
8
in)
Catch
2
Mount the unit onto the bracket
.
Note
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
makes of Japanese cars. In such a case, consult your
Sony dealer.
When mounting this unit to the preinstalled
brackets of your car, use the supplied screws
brackets of your car, use the supplied screws
in
the appropriate screw holes, based on your car: T
for TOYOTA, M for MITSUBISHI and N for NISSAN.
for TOYOTA, M for MITSUBISHI and N for NISSAN.
Note
To prevent malfunction, install only with the supplied
screws .
To prevent malfunction, install only with the supplied
screws .
When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
to dashboard/center console
Existing parts supplied
with your car
with your car
Bracket
Bracket
Fuse replacement
Fuse (10 A)
Click on the first or last page to see other WX-800UI service manuals if exist.