Read Sony WX-800UI Service Manual online
WX-800UI
5
4. The resetting operation is executed by pressing the [SOURCE
OFF] button for 1 second after the setting ends, and the unit
returns to the normal condition.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
Display after reset
1-2. Display in Destination Setting Mode
(Displayed characters/values in the following fi gure are example)
(Displayed characters/values in the following fi gure are example)
Destination code
12 digits
OP0
OP1
OP2
OP3
OP4
OP5
1-3. Entering the Destination Code
• Method of operation by main unit
• Method of operation by main unit
1. Rotate the control dial, and select the alphanumeric character
of “0 to F”.
2. The digit advances by pressing the [PUSH ENTER/MENU] or
[
M>
SEEK+] button.
The digit returns by pressing the [MODE ] or [SEEK–
.m
] button.
3. The setting is completed by pressing the [PUSH ENTER/
MENU] button, then the display turns off, the initialization op-
eration is done, and the display returns to the clock display.
eration is done, and the display returns to the clock display.
• Method of operation by remote commander
(E, Indian and Australian models only)
Note: The model to which the remote commander is not attached can
also be operated by using the remote commander.
1. Press the [V] or [v] button, and select the alphanumeric char-
acter of “0 to F”.
2. The digit advances by pressing the [b] or [ENTER] button.
The digit returns by pressing the [B] button.
3. The setting is completed by pressing the [ENTER] button, then
the display turns off, the initialization operation is done, and
the display returns to the clock display.
the display returns to the clock display.
1-4. Destination Code
Destination
OP5
OP4
OP3
OP2
OP1
OP0
AEP, UK (EUR)
0
8
8
0
1
1
Russian (RU2)
0
9
8
0
1
7
E, Australian (E)
0
C
B
0
1
0
Indian (IN)
0
C
9
0
1
0
– Continued on next page –
Click on the first or last page to see other WX-800UI service manuals if exist.