WX-800UI - Sony Car Audio Service Manual (repair manual). Page 13

When mounting in a Japanese car, see “Mounting 
the unit in a Japanese car”.

You can use a commercially available double DIN 
installation kit. Choose an installation kit with the 
following panel frame size.
Larger than 172 × 97 mm (6 

7

/

8

 × 3 

7

/

8

 in) (w/h), with 

an inner corner radius of less than 0.5 mm (

1

/

32

 in).

Note
Be sure to use the supplied screws 

.

You may not be able to install this unit in some 
makes of Japanese cars. In such a case, consult your 
Sony dealer.

When mounting this unit to the preinstalled 
brackets of your car, use the supplied screws 

 in 

the appropriate screw holes, based on your car: T 
for TOYOTA, M for MITSUBISHI and N for NISSAN.

Note
To prevent malfunction, install only with the supplied 
screws .

When replacing the fuse, be sure 
to use one matching the 
amperage rating stated on the 
original fuse. If the fuse blows, 
check the power connection and 
replace the fuse. If the fuse blows 
again after replacement, there 
may be an internal malfunction. In such a case, 
consult your nearest Sony dealer.