Read Sony XDR-S60DBP Service Manual online
XDR-S60DBP
6
2-7. CHASSIS BLOCK
:LUHVHWWLQJ
:LUHVHWWLQJ
:LUHVHWWLQJ
–
5HDUERWWRPYLHZ
–
–
/HIWYLHZ
–
0 Remove the chassis block in
the direction of an arrow.
9 Move the flexible flat cable
(13 core) in the direction of
an
arrow.
6 connector
(CN406)
3 connector
(CN503)
AMP board
< Fig. A >
4 flexible flat cable (13 core)
(CN407)
flexible flat cable (13 core)
MAIN board
5 claw
8 screw
(P2.6
u 6)
8 screw
(P2.6
u 6)
7 Remove the solder.
[gray] (See Fig. A)
RV401
J401
J402
2 Remove the solder.
[white] (See Fig. A)
2 Remove the solder.
[red] (See Fig. A)
[white]
[gray]
[red]
MAIN board
screw hole boss
MAIN board hole
AMP board
1 Remove the speaker wire
from the claw.
Note 2: When installing the chassis block,
confirm that J401, J402 and RV401
are installed securely.
Note 3: When installing the chassis
block,
block,
confirm that screw
hole boss is installed securely
to MAIN board hole.
qa chassis block
Note
1: When installing the chassis block,
be careful not to pinch wires.
Click on the first or last page to see other XDR-S60DBP service manuals if exist.