Read Sony XDR-S60DBP Service Manual online
XDR-S60DBP
8
2-10. MODULE ASSY (DAB MODULE) (DAB1)
2-9. MAIN BOARD BLOCK
4 MAIN board block
chassis
plate (antenna)
Cut this part.
Note: When the chassis replacing,
cut off the part as shown in the
figure
below.
2 two screws
(P2.6
u 6)
3 two claws
3 claw
2 screw
(P2.6
u 6)
2 screw
(P2.6
u 6)
1 Remove the solder.
[white]
–
Chassis block rear top view
–
3 Remove eighteen solders.
1 Remove the solder.
1 Remove the solder.
1 Remove the solder.
1 Remove the solder.
1 Remove the solder.
1 Remove the solder.
1 Remove the solder.
1 Remove the solder.
2 terminal
(module)
2 terminal
(module)
2 terminal (module)
2 terminal (module)
4 module assy (DAB module)
(DAB1)
3 Remove thirty solders.
terminal
(module)
(module)
MAIN board
solder
solder
1.5 mm
module assy (DAB module)
(DAB1)
(DAB1)
7HUPLQDOPRGXOHVHWWLQJ
–
0$,1ERDUGEORFNUHDUWRSYLHZ
–
3 Remove three solders.
long side
notch
short side
Note: When installing the connector
pin 3P (CN405), check the
direction to install.
to module assy
(DAB module) (DAB1)
(DAB module) (DAB1)
to MAIN board
Click on the first or last page to see other XDR-S60DBP service manuals if exist.