Read Sony HCD-SHAKE100 / HCD-SHAKE99 Service Manual online
HCD-SHAKE99/HCDSHAKE100
14
8
four insulator screws
7
connector
qa
insulator
6
belt
3
Insert the thin
wire (clip etc.).
5
tray
qs
service,
optical
device(7G)
qa
insulator
qa
insulator
qh
qk
cable, flexible flat
(24
core)
qg
tape
1
six claws
4
9
0
2
chuck holder assy (T)
2
Solder the short-land.
qf
wire (flat type)
(5
core)
– Bottom view –
loading assy (T)
qd
base, lo assy
qj
holder, FFC
Note 2: When assembling the optical
pick-up block, remove the solder of
short-land after connecting the
cable, flexible flat (24 core).
2-9. SERVICE, OPTICAL DEVICE(7G), CABLE, FLEXIBLE FLAT
Note 1 : Before disconnecting the cable, fl exible fl at (24 core) of optical pick-up block, solder the short-land.
Under the guide
Under the guide
(Fold area)
(Fold area)
,QVWDOODWLRQRIFDEOHIOH[LEOHIODWFRUHDQGZLUHIODWW\SHFRUH
Note: This illustration sees the loading assy (T) from bottom side.
1
cable, flexible flat (24 core)
2
Through the hole
3
Through the hole
4
terminal face
loading assy (T)
7
cable, flexible flat
(24
core)
6
holder, FFC
5
three claws
5
two claws
8
wire (flat type)
(5
core)
9
tape
Ver. 1.1
Click on the first or last page to see other HCD-SHAKE100 / HCD-SHAKE99 service manuals if exist.