HCD-SHAKE100, HCD-SHAKE99 - Sony Audio Service Manual (repair manual). Page 112

1.3

2014.12

Add C905 in MOTHERBOARD board (HCDSHAKE100).

Add ‘*’ mark to CLAMP, SLEEVE FERRITE (SHAKE99: US, AUS/HCDSHAKE100: EA, MY, SAF)

in page 82 and 110 (Service code changed).

Add Servicing Notes for IC306 in MOTHERBOARD board (Service code changed).

Change description of CN101 and CN301 in MOTHERBOARD board.

Change description of CN3000 in TUNER board.

Change P/N of C2703 and C2706 in USB board.

Change P/N of C5000 in VIDEO board.

Change P/N of Switching Regulator in page 85 and 110.

Change sentence for CLASS 1 LASER product in page 4.

Change wire description of 1-848-367-61 in page 11, 83 and 110.

Change P/N of IC105 in MOTHERBOARD board.

1.4

2015.04

Add Servicing Notes for IC301 (HCDSHAKE100) in MOTHERBOARD board (Service code changed).

Change description of IC102 in MOTHERBOARD board.

Change information in page 73, 78 and 79.

Change P/N and description of D2601, D2602, D2603, D2604, D2605 and D2614 in VOLUME board.

Change P/N and description of D2801 and D2802 in LED BAR LEFT board.

Change P/N and description of D2902 and D2904 in LED BAR RIGHT board.

Change P/N and description of Ref. No. 110 in page 82 and 109.

Delete Servicing Notes for IC306 in MOTHERBOARD board (Service code changed).

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note: If you still see the original page, press the [Enter] key again.