Read Sony HBD-N7100W / HBD-N7100WL / HBD-N8100W / HBD-N9100W / HBD-N9100WL / HBD-N9150W / HBD-N9150WL / HBD-N9900SH Service Manual online
HBD-N7100W/N7100WL/N8100W/N9100W/N9100WL/N9150W/N9150WL/N9900SH
9
3. Optical pick-up (KEM-480AHA) (OP1) replacement
Flow of replacement:
Flow of replacement:
Note: The photo in fl ow is an image.
Barcode label on
new optical pick-up
(KEM-480AHA)
(OP1) bottom side
new optical pick-up
(KEM-480AHA)
(OP1) bottom side
Take photo (JPEG)
by digital camera
by digital camera
Save the text data
to USB memory
(memory capacity
need not be 8GB)
to USB memory
(memory capacity
need not be 8GB)
Connect USB memory
with USB connector on
this unit, and read the text
data by the service mode
with USB connector on
this unit, and read the text
data by the service mode
Change photo into
the text data with
the barcode decoder
the text data with
the barcode decoder
Procedure:
1. Remove the INSULATOR (4 pieces) and broken optical pick-
1. Remove the INSULATOR (4 pieces) and broken optical pick-
up (KEM-480AHA) (OP1) from LOADING ASSY (LOM1).
2. Take photo of the barcode on new optical pick-up (KEM-
480AHA) (OP1) bottom side by digital camera.
3. Assemble the INSULATOR (4 pieces) to new optical pick-up
(KEM-480AHA), fi x (Torque value: 2 kgf) it to LOADING
ASSY with screw, and assemble this unit.
ASSY with screw, and assemble this unit.
4. Drag & drop the taken photo by step 2 to “BDPRDec.exe”, and
make the text data (File name: BuData.txt).
5. Save the text data to USB memory.
6. Connect USB memory with USB connector on this unit, and
6. Connect USB memory with USB connector on this unit, and
turn the power on.
– Front panel view –
7. Press the [FUNCTION] button on the remote commander to
select “BD/DVD”.
8. Press the buttons on the remote commander in order of
[DISPLAY], [0], [2], [1], [SUBTITLE], and enter the service
mode.
mode.
9. Press the buttons on the remote commander in order of [8], [1],
[ENTER], and execute “[1] Drive OP data Write”.
10. Turn the power off after writing the OP data.
11. Turn the power on, and enter the service mode again.
12. Press the buttons on the remote commander in order of [8], [7],
11. Turn the power on, and enter the service mode again.
12. Press the buttons on the remote commander in order of [8], [7],
[3], [ENTER], and the dIOP value is displayed.
13. Confi rm value is the following specifi cation value, and turn the
power off.
Specifi cation value:
BD
BD
:
6 mA
DVD/CD
:
9 mA
14. Turn the power on, confi rm playback performance of the BD
(BLX-104)/DVD (HLX-513)/CD (HLX-A1).
15. Completely assemble this unit, and complete the repair.
Click on the first or last page to see other HBD-N7100W / HBD-N7100WL / HBD-N8100W / HBD-N9100W / HBD-N9100WL / HBD-N9150W / HBD-N9150WL / HBD-N9900SH service manuals if exist.