Read Sony HBD-N7100W / HBD-N7100WL / HBD-N8100W / HBD-N9100W / HBD-N9100WL / HBD-N9150W / HBD-N9150WL / HBD-N9900SH Service Manual online
HBD-N7100W/N7100WL/N8100W/N9100W/N9100WL/N9150W/N9150WL/N9900SH
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2013.02
New
1.1
2013.05
Addition of Mexican model (HBD-N7100W/N7100WL)
Addition of Russian and Taiwan models (HBD-N8100W)
Addition of Russian, Latin American (Except Mexican, Brazilian and Argentina) and Thai models
(HBD-N9100W)
Addition of 110 − 240V Area in E, Russian, Taiwan and Thai models (HBD-N9100WL)
Addition of HBD-N9150W/N9150WL
Change of Part for Ref. No. C3025, C3041, C3042, C3106, C3107, C3134, C3135, C3156, C3157, C3306,
C3307, C3334, C3335, C3356, C3357, C3453, C3454, C3456, C3457, C3461, C3462, C3465, C3466,
C3560, C3565, C3570, C3574, D3101 to D3108 and D3301 to D3308 on the NJ_AMP board
Deletion of Part for Ref. No. C3099, C3567 to C3569, D3505, Q3551, Q3556, R3641 to R3645 and
R3648 on the NJ_AMP board
Addition of the notes for SCREW
Addition of Ref. No. FFC5 and FFC10
Change of Part No. for CONVERSION ADAPTOR (Ref. No. ACP1) (PX model)
(SMR-13003)
1.2
2014.04
Addition of Part for CONVERSION PLUG ADAPTOR 3P (Ref. No. ACP2)
(SMR-14006)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.