Read Sony HBD-N7100W / HBD-N7100WL / HBD-N8100W / HBD-N9100W / HBD-N9100WL / HBD-N9150W / HBD-N9150WL / HBD-N9900SH Service Manual online
HBD-N7100W/N7100WL/N8100W/N9100W/N9100WL/N9150W/N9150WL/N9900SH
7
NOTE OF REPLACING THE OPTICAL PICK-UP (KEM-
480AHA) (OP1) AND THE COMPLETE MB1004 BOARD
480AHA) (OP1) AND THE COMPLETE MB1004 BOARD
The password will be supplied to only service HQ, and
service center name, q’ty and all of software registered
information should be maintained by service HQ, and
Audio will ask to report the registration information.
service center name, q’ty and all of software registered
information should be maintained by service HQ, and
Audio will ask to report the registration information.
Optical pick-up (KEM-480AHA) (OP1) for BD requires precise
read out functions and secure contents protection system for more
than past DVD/CD.
Therefore, in the case repaired as follows, the writing work of the
OP data is necessary.
read out functions and secure contents protection system for more
than past DVD/CD.
Therefore, in the case repaired as follows, the writing work of the
OP data is necessary.
•
When the optical pick-up (KEM-480AHA) (OP1) is replaced
(The complete MB1004 board doesn’t replace).
(The complete MB1004 board doesn’t replace).
• When both the optical pick-up (KEM-480AHA) (OP1) and
complete MB1004 board are replaced.
• When the complete MB1004 board is replaced (The optical
pick-up (KEM-480AHA) (OP1) doesn’t replace)
(In this case, do the work of “3. Optical pick-up (KEM-
480AHA) (OP1) replacement” other than the replacement of
new optical pick-up).
480AHA) (OP1) replacement” other than the replacement of
new optical pick-up).
Note: The servo adjustment is done while writing the OP data. The manual
adjustment is unnecessary.
LD ON TIME history doesn’t carry over.
Do not touch any optical block parts, turn table and during replac-
ing. BD laser diode is very sensitive.
1. Preparation
1-1. ESD Countermeasure
It is necessary to confi rm the state of static electricity in the work
space before the repair is started.
The static electricity resistance of the BD laser is weaker than that
of the DVD/CD laser.
Do work space and worker’s ESD countermeasures to prevent de-
struction by ESD.
1-1. ESD Countermeasure
It is necessary to confi rm the state of static electricity in the work
space before the repair is started.
The static electricity resistance of the BD laser is weaker than that
of the DVD/CD laser.
Do work space and worker’s ESD countermeasures to prevent de-
struction by ESD.
1-2. Jig
•
•
Digital camera (Recommend with macro mode)
• USB
memory
• PC
•
•
Barcode decoder (Refer to “1-3. Barcode decoder
(BDPRdec)”)
(BDPRdec)”)
1-3. Barcode decoder (BDPRdec)
Jig name: BDPRdec.exe
Software contents:
Jig name: BDPRdec.exe
Software contents:
• BDPRdec.exe
: Barcode decoder software
•
SavePath.ini :
Decoded
fi le destination setting fi le (Ini-
tial destination is “C:\BuData.txt”)
• TasmanBars.dll : Decode dll
• Uninst.exe
: Uninstall the “BDPRdec.exe” from PC
Note: When working by OS of the version after VISTA, it is necessary
to change destination of the decoded fi le to save by UAC function
(user account function).
(user account function).
In that case, change the description in “SavePath.ini” (default de-
scription is “C:\BuData.txt”) other than C drive.
Install procedure:
1. Unzip the barcode decoder fi les to any PC folder.
2. Check the attached 2D code photo (OK_sample.JPG) drag &
1. Unzip the barcode decoder fi les to any PC folder.
2. Check the attached 2D code photo (OK_sample.JPG) drag &
drop onto “BDBUDec.exe”.
When the barcode decoder is used for the fi rst time, the pass-
word is necessary. It is unnecessary since the second times.
word is necessary. It is unnecessary since the second times.
Note 1: The password will be supplied to only service headquarters, and
service center name/q’ty/all of software registered information
should be maintained by service headquarters.
should be maintained by service headquarters.
Note 2: Do not change the decoded fi le name “BuData.txt”.
3. When “.NET frame work requirements” is displayed, down-
load following applications from Microsoft download site.
•
Microsoft .NET Framework Version 2.0 Redistributable Pack-
age (x86)
age (x86)
http://www.microsoft.com/downloads/details.aspx?displaylan
g=en&FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5
•
Microsoft .NET Framework 2.0 Service Pack 1 (x86)
http://www.microsoft.com/downloads/details.aspx?displaylan
g=en&FamilyID=79bc3b77-e02c-4ad3-aacf-a7633f706ba5
How to use:
Case 1
Case 1
Drag & drop 2D code photo onto “BDPRdec.exe”.
Case 2
Drag & drop BU data fi le onto “BDPRdec.exe”.
Data
fi le name be changed to specify format and end of
7 character are defi ned.
You can also enter the fi le path at the prompt.
Click on the first or last page to see other HBD-N7100W / HBD-N7100WL / HBD-N8100W / HBD-N9100W / HBD-N9100WL / HBD-N9150W / HBD-N9150WL / HBD-N9900SH service manuals if exist.