Read Sony CDP-LSA1 / MDS-LSA1 / STR-LSA1 Service Manual online
12
3
Music playback
When data is communicated between LINCed devices, the i.LINK data signal will be output. As the header signal and data signal are an
isochronous packet with no time-related transmission restrictions, they are given priority than the asynchronous packet with no time-related
restrictions, and sent immediately after the cycle signal.
restrictions, and sent immediately after the cycle signal.
i.LINK signals such as video and audio signals are composed of the header signal and data signal. When sending music data between
LINCed LISSA series devices, data will be sent at 200 Mbps.
Fig. 1-11. Output during Music Playback
(Note) i.LINK output of STR-LSA1
When TUNER or ANALOG is selected by switching the input source of the STR-LSA1, music data will be output in the non-LINC state
(broadcast output). When a LISSA series device broadcast outputs data, data will be sent at 100 Mbps instead of 200 Mbps. For this reason,
the signal waveform on the display of Oscilloscope will be longer along the time axis during LINC playback.
the signal waveform on the display of Oscilloscope will be longer along the time axis during LINC playback.
(Refer to Fig. 1-11 and Fig. 1-12)
Before music playback
(Cycle signal + header signal)
During music playback
(Cycle signal + header signal + data signal)
During music output
(Cycle signal + header signal + data signal)
Fig. 1-12. Waveform during Music Output at 100 Mbps
Click on the first or last page to see other CDP-LSA1 / MDS-LSA1 / STR-LSA1 service manuals if exist.