LC-52XD1E (serv.man12) - Sharp TV User Guide / Operation Manual. Page 18

Antennas with an integrated amplifi er need a supply 
voltage on the antenna line. (Page 4)

With this function you can transfer the station data of 
the TV (such as station preset number/name/channel/
frequency) to the recorder if the recorder is set up for 
AV-Link. This function is available only for conventional 
analogue stations.

Press MENU and the menu screen displays.

Press 

c/d to select “Connections”, and then 

press OK.

Press 

a/b to select  “AV-Link”, and then press 

OK.

Select “Start transmission”, and then press OK.

•  The TV transfers the station list to the AV-Link 

recorders connected to EXT 2.

E 

Encrypted stations should be labelled as decoder 
stations, so that they can be decoded automatically by 
the connected decoder.

E

  Manual adjustment of AV standard

Ask your dealer which standard to select for specifi c 
AV equipment (if it is not recognised automatically).
Select the appropriate external terminal (EXT 1- 3) and 
its AV standard as advised.

E 

If this function is activated and you switch to an AV 
device (connected to EXT 1 or 2) that delivers switching 
voltage to playback, its picture and sound will be 
reproduced immediately at all TV presets. (This function 
is available only for analogue TV and DTV mode.)

You can search for stations automatically or manually 
as well as set the menu language, time and date, child 
lock, on-screen displays, etc.

The menu contains the automatic station search and 
the manual station settings. You can re-sort stations, 
enter and change station names, and delete stations.

E 

Use this menu to search for stations automatically once 
certain settings have been made. (See page 8, Initial 
auto installation (Analogue)

 for details.)

Press MENU and the TV menu screen displays.

Press 

c/d to select “Setup”, and then press 

OK.

 Press 

a/b to select “Channels”, and then 

press OK.

 Press 

a/b to select “Search wizard”, and then 

press OK.

•  You will get a table for the auto station search.

If necessary select “Change search settings”, 
and then press OK. Otherwise skip to step 8.

Press 

a/b/c/d to select your country or area 

listed on the screen, and then press OK.

Indicate whether you wish to have “all” stations 
or “new ones only” searched for using 

c/d, 

and then press OK.

Select the desired TV/colour standard, and then 
press OK.

Specify from which station position onwards the 
stations are to be stored, and then press OK.

Press 

a/b to select “Start search”, and then 

press OK.

NOTE
•  The station search may take some time. 
•  Do not make any entries or switch off the set during this 

time. 

•  When the search has ended you will be shown the found 

and stored stations sorted in numerical order. 

•  After the station search has been completed, close the 

table by pressing END.

TV menu

Child lock

Auto format

Language

Factory settings

Miscellaneous

on

Geometry

Channels

Setup

Select decoder 
station(s)

Sound encoding

Press OK to mark an encoded station. The 
marking can be removed from a station that 
has already been marked by pressing the same 
key.

For reception of encoded audio signals select 
either “always” if these are always encoded or 
“Automatic” if these are sometimes encoded. 
For audio signals which are always uncoded, 
select “never”.