LC-52XD1E (serv.man12) - Sharp TV User Guide / Operation Manual. Page 21

Some of the useful features can be directly called up by 
pressing assigned buttons on the remote control.

NOTE
•  You can adjust the factory presets given in “STANDARD”, 

“SOFT”, “ECO” and “DYNAMIC”.

•  You can assign different AV mode to each external input 

source.

•  Enhanced Picture Contrast technology detects the source 

video characteristics and smoothly adjusts the screen 
brightness accordingly, enabling deeper black levels.

•  Enhanced Picture Contrast is activated when you turn the 

OPC function off for the items “STANDARD”, “SOFT” and 
“DYNAMIC” in AV mode.

: For a highly defi ned image in a normally 

bright room (Enhanced Picture Contrast: On)

: Creates a softer image. (Enhanced Picture 

Contrast: On)

: Reduces power consumption. (Enhanced Picture 

Contrast: Off)

: For a clear-cut image emphasising high 

contrast for sports viewing. (Enhanced Picture Contrast: 
On)

: Allows the user to customise settings as desired. 

You can set the mode for each input source. (Enhanced 
Picture Contrast: Off)

AV mode gives you fi ve viewing options to choose from 
to best match the system environment, which can vary 
due to factors like room brightness, type of programme 
watched or the type of image input from external 
equipment.

Press AV MODE.

•  The AV mode menu 

displays.

Press AV MODE or 

a/b 

while the AV mode menu 
displays on the screen.

•  As you toggle down 

the options, each is 
immediately refl ected on the screen. No need to 
press OK.

AV mode

SOFT

ECO

DYNAMIC

USER

STANDARD

Use the INPUT SOURCE screen to select/check the 
external equipment connected to the terminal(s) on the 
back of the TV.

To watch images from 
external AV equipment, 
press 

b. (Page 10)

•  To close the INPUT SOURCE 

screen, press 

b again.

Press 

a/b to select the 

corresponding terminal, and 
then press OK.

 Press 

p, a status display appears for a few 

seconds.

2  ZDF 

  

Mono

13:51

•  In the top line you can see the name of the 

programme. See page 18 for how to customise the 
settings for the status display. 

INPUT SOURCE

TV

DTV

EXT1

EXT2

EXT3

EXT4

EXT5

EXT6

You can freeze a motion picture on the screen.

Press 

3.

Press 

3 again to exit still image.

NOTE
•  This function may not be available depending on signal 

condition.

Automatically adjusts the brightness of the screen.

 Press 

OPC on the remote control unit to switch 

the Optical Picture Control on and off.

NOTE
•  When set to “on”, the TV senses the surrounding light and 

automatically adjusts the backlight brightness. Make sure 
no object obstructs the OPC sensor, which could affect its 
ability to sense surrounding light.

•  Under the factory default condition, OPC becomes active 

when you select “ECO” for the AV mode.

•  OPC turns off whenever an adjustment is made to the 

“Backlight” setting.

•  OPC can be adjusted and reset for each individual AV 

mode.

This function improves LCD response and moving 
picture quality by reducing motion blur.

 Press 

ACTION to turn the Action mode on/off.

•  The Action mode screen indicates the current on/off 

status.

•  The Action mode screen goes out afters several 

seconds.