LC-52XD1E (serv.man12) - Sharp TV User Guide / Operation Manual. Page 22

You can select the picture size. Selectable picture size 
varies with the type of signal received.

Basically, if you set Auto format to “on” in the Setup 
menu, the optimum Wide mode is automatically chosen 
for every broadcast. You can however, change the 
screen format manually as explained below.

NOTE
•  Aside from manually changing the Wide modes as 

explained herein, the TV may detect and select the 
optimum Wide mode according to the signal received.

Press 

f.

•  The Wide modes menu displays.
•  The menu lists the wide mode options selectable for 

the type of video signal currently received.

Press 

f or 

a/b while the Wide modes menu 

displays on the screen.

•  As you toggle down the options, each is immediately 

refl ected on the screen. No need to press OK.

: For 16:9 squeeze pictures.

: For 4:3 “standard” pictures. A side bar appears 

on each side.

: In this mode the picture is progressively 

stretched toward each side of the screen.

: For 16:9 letterbox pictures. Bars may 

appear on the top and bottom with some programmes.

: For 14:9 letterbox pictures. Bars may 

appear on the top and bottom with some programmes.

: Display with the Overscan image. Crop all sides of 

screen.

: Display with the Underscan image. 

(Display with the High-Defi nition image compressed 
optimally. Noise may appear on the edge of the screen 
with some programmes.)

You can select the picture size.

Press 

f.

•  The Wide modes menu displays.

Press 

f or 

a/b to select a desired item on 

the menu.

NOTE
•  Connect the PC before making adjustments. (Page 11)
•  Selectable picture size may vary with input signal type.

: An image fully fi lls the screen. 

: Keeps the original aspect ratio in a full screen 

display.