LC-52XD1E (serv.man12) - Sharp TV User Guide / Operation Manual. Page 13

NOTE
•  The cables marked with * are commercially available items.
•  The PC input terminals are DDC1/2B-compatible.
•  Refer to page 34 for a list of PC signals compatible with the 

TV.

•  Macintosh adaptor may be required for use for some 

Macintosh computers.

•  When connecting to a PC, the correct input signal type is 

automatically detected. 

This TV incorporates four typical AV Link functions 
for smooth connections between the TV and other 
audiovisual equipment.

While the TV is in standby mode, it automatically turns 
on and plays back the image from the audiovisual 
source (e.g. VCR, DVD).

When the TV enters standby mode, the connected 
audiovisual equipment (e.g. VCR, DVD) enters standby 
mode as well.

When the remote control unit of the connected VCR 
has the WYSIWYR button, you can automatically start 
recording by pressing the WYSIWYR button.

Automatically transfers the channel preset information 
from the tuner on the TV to the one on the connected 
audiovisual equipment (e.g. VCR) via the EXT 2 
terminal.

NOTE
•  Refer to operation manuals of each external equipment for 

the details.

•  Only works when the audiovisual equipment is connected 

to the EXT 2 terminal on the TV with AV Link via a fully 
wired SCART.

•  The use of the AV Link function is only possible if the TV-

set has enforced a complete auto-installation with the 
connected audiovisual equipment (Page 8, initial auto 
installation).

  The availability of the AV Link function depends on 

the audiovisual equipment used. Depending on the 
manufacturer and type of equipment used, it is possible 
that the described functions may be completely or partially 
unusable. 

Use the EXT 4 terminals to connect a PC.

ø 3.5 mm stereo minijack cable*

RGB cable*

RGB/DVI conversion cable*

ø 3.5 mm stereo minijack cable*

You can use the EXT 1 terminal when connecting a 
decoder and other audiovisual equipment.

SCART cable*