LC-52XD1E (serv.man12) - Sharp TV User Guide / Operation Manual. Page 17

Read Sharp LC-52XD1E (serv.man12) User Guide / Operation Manual online

 
15
Menu operations
Connections menu
TV menu
HDMI setup
Supply voltage
AV-Link
Miscellaneous
Setup
Connections
Input select
Decoder
no (0V)
EXT 2
Decoder
Make sure to select the terminal (EXT 1 or 2) to which 
the decoder is connected.
NOTE
•  This setting will be refl ected in the “Decoder stations” 
function under “Miscellaneous”. (Page 16)
Input select
For setting the signal type of external equipment.
NOTE
•  If no (colour) image displays, try to change the other 
signal type.
•  Check the operation manual of the external equipment for 
the signal type.
•  TV, DTV, EXT3, EXT5 and EXT6 are not displayed in Input 
Select.
•  If both CVBS and RGB signals are input to EXT 1 using 
a SCART cable, the TV may output an RGB signal even 
though you have designated CVBS for the respective 
terminal. This happens due to the setting of your external 
equipment.
HDMI setup
HDMI (High-Defi nition Multimedia Interface) terminal 
selection.
Press MENU and the TV menu screen displays.
Press 
c/d to select “Connections”, and then 
press OK.
Press 
a/b to select  “HDMI setup”, and then 
press OK.
Press 
a/b to select “EXT5” or “EXT6”, and 
then press OK.
Press 
a/b to select the desired item.
Press 
c/d to select the desired setting.
1
2
3
4
5
6
NOTE
•  Refer to your external equipment operation manual for the 
signal type.
•  Items with * may be greyed out depending on the type of 
signal input from the external equipment.
•  Item marked ** is only available when EXT5 is selected.
Selectable 
items
Description
RGB/YCbCr 
4:4:4/YCbCr 4:2:2
ITU601/ITU709
Normal/           
Enhanced
Enable/Disable
Digital/Analogue
Signal type*
Colour 
matrix*
Dynamic 
range*
Auto view
Audio 
select**
Select the video signal type 
from the HDMI terminal. 
Select the internal colour 
space conversion method 
when an RGB signal is 
input. 
Select the signal amplitude 
range. Usually, select 
“Normal”.
Set whether or not to use 
Wide mode based on 
signal recognition, including 
an HDMI signal.
Select “Digital” for audio 
signal via the HDMI 
terminal. Select “Analogue” 
for audio signal via the 
AUDIO jack.
HDMI setup 
items
Input source
EXT 1
EXT 2
EXT 4
Signal type
Y/C, CVBS, RGB
Y/C, CVBS
PC (RGB), COMPONENT
Page of 42
Display

Click on the first or last page to see other LC-52XD1E (serv.man12) service manuals if exist.