Read Sharp LC-40LU700E (serv.man7) Service Manual online
LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
4 – 10
9. Removing of Bezel Ass’y, Panel Chassis Ass’y, Lens Sheet, Diffusion Plate, Back Light Chassis and LCD
Control Unit (40 inch models).
Control Unit (40 inch models).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 14 lock screws
,12 lock screws
and detach the Bezel Ass’y
.
2. Remove the 4 Clip
and detach the 40” LCD Panel HIRAKI Unit and Panel Chassis Ass’y
.
3. Detach the DBEF Sheet
and Lens Sheet
and Diffusion Plate
.
4. Remove the 21 Push Rivets
and 8 Support Pins
and detach the Reflection Sheet
.
5. Remove the 54 Rivets
.
6. Remove the 9 Terminators
and 18 connections
and detach the 10 LED6 PWB1 Units
and 8 LED6 PWB2 Units
.
7. Detach the 5 LED5 PWB1 Units
and 4 LED5 PWB2 Units
.
8. Disconnect the connecting cords from the 9 connectors
of the LED5 PWB1/2 Unit.
9. Detach the Back Light Chassis
.
10.Detach the 2 Connecting Cord
and 2 Ferrite Core
.
11.Remove the 6 lock screws
and detach the LCD Control Unit
䎳䏄䏑䏈䏏䎃䎃䎦䏋䏄䏖䏖䏌䏖䎃
䎤䏖䏖䎊䏜
䎤䏖䏖䎊䏜
䎔
䎕
䎗
䎖
䎘
䎙
䎛
䎜
䎔䎓
䎔䎔
䎔䎕
䎔䎛
䎔䎚
䎔䎘
䎔䎙
䎔䎗
䎔䎗
䎔䎘
䎔䎖
䎔䎙
䎕䎓
䎕䎔
䎕䎕
䎗䎓䎅䎃䎯䎦䎧
䎳䏄䏑䏈䏏䎃䎃
䎳䏄䏑䏈䏏䎃䎃
䎫䎬䎵䎤䎮䎬䎃
䎸䏑䏌䏗
䎥䏈䏝䏈䏏䎃䎃䎤䏖䏖䎊䏜
䎯䏈䏑䏖䎃䎶䏋䏈䏈䏗
䎧䏌䏉䏉䏘䏖䏌䏒䏑䎃䎳䏏䏄䏗䏈
䎚
䎧䎥䎨䎩䎃䎶䏋䏈䏈䏗
䎥䏄䏆䏎䎃䎯䏌䏊䏋䏗䎃
䎦䏋䏄䏖䏖䏌䏖
䎦䏋䏄䏖䏖䏌䏖
䎩䏈䏕䏕䏌䏗䏈
䎦䏒䏕䏈
䎦䏒䏕䏈
䎦䏒䏑䏑䏈䏆䏗䏌䏑䏊䎃䎦䏒䏕䏇
䎯䎦䎧䎃䎦䏒䏑䏗䏕䏒䏏䎃
䎃䎸䏑䏌䏗
䎃䎸䏑䏌䏗
䎦䏏䏌䏓
䎵䏈䏉䏏䏈䏆䏗䏌䏒䏑䎃䎶䏋䏈䏈䏗
䎶䏘䏓䏓䏒䏕䏗䎃䎳䏌䏑
䎳䏘䏖䏋䎃䎵䏌䏙䏈䏗
䎔䎜
䎕䎗
䎕䎖
Click on the first or last page to see other LC-40LU700E (serv.man7) service manuals if exist.