Read Sharp LC-40LU700E (serv.man7) Service Manual online
LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
4 – 14
13. Removing of Bezel Ass’y, Panel Chassis Ass’y, Lens Sheet, Diffusion Plate, Back Light Chassis and LCD
Control Unit (52 inch models).
Control Unit (52 inch models).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 9 lock screws
, 3 lock screws
18 lock screws
and detach the Bezel Ass’y
.
2. Remove the 6 Clip
and detach the 52” LCD Panel HIRAKI Unit and Panel Chassis Ass’y
.
3. Detach the Optical Sheet
and Lens Sheet
and Diffusion Plate
.
4. Remove the 43 Push Rivets
and 11 Support Pins
and detach the Reflection Sheet
.
5. Remove the 72 Push Rivets
.
6. Remove the 12 Terminators
and 24 connections
and detach the 12 LED8 PWB1 Units
and 12 LED8 PWB2 Units
.
7. Detach the 6 LED6 PWB1 Units
and 6 LED6 PWB2 Units
.
8. Disconnect the connecting cords from the 12 connectors
of the LED6 PWB1/2 Unit.
9. Detach the Back Light Chassis
.
10.Detach the 2 Connecting Cord
and 2 Ferrite Core
.
11.Remove the 6 lock screws
and detach the LCD Control Unit
䎕䎓
䎔
䎖
䎕
䎘
䎗
䎙
䎛
䎜
䎔䎔
䎔䎖
䎔䎜
䎔䎛
䎔䎚
䎔䎘
䎔䎙
䎔䎚
䎕䎔
䎕䎕
䎕䎖
䎘䎕䎅䎃䎯䎦䎧
䎳䏄䏑䏈䏏䎃䎃
䎳䏄䏑䏈䏏䎃䎃
䎫䎬䎵䎤䎮䎬䎃
䎸䏑䏌䏗
䎥䏈䏝䏈䏏䎃䎃䎤䏖䏖䎊䏜
䎳䏄䏑䏈䏏䎃䎃䎦䏋䏄䏖䏖䏌䏖䎃
䎤䏖䏖䎊䏜
䎤䏖䏖䎊䏜
䎯䏈䏑䏖䎃䎶䏋䏈䏈䏗
䎚
䎲䏓䏗䏌䏆䏄䏏䎃䎶䏋䏈䏈䏗
䎧䏌䏉䏉䏘䏖䏌䏒䏑䎃䎳䏏䏄䏗䏈
䎥䏄䏆䏎䎃䎯䏌䏊䏋䏗䎃
䎦䏋䏄䏖䏖䏌䏖
䎦䏋䏄䏖䏖䏌䏖
䎩䏈䏕䏕䏌䏗䏈
䎦䏒䏕䏈
䎦䏒䏕䏈
䎦䏒䏑䏑䏈䏆䏗䏌䏑䏊䎃䎦䏒䏕䏇
䎯䎦䎧䎃䎦䏒䏑䏗䏕䏒䏏䎃
䎃䎸䏑䏌䏗
䎃䎸䏑䏌䏗
䎦䏏䏌䏓
䎵䏈䏉䏏䏈䏆䏗䏌䏒䏑䎃䎶䏋䏈䏈䏗
䎶䏘䏓䏓䏒䏕䏗䎃䎳䏌䏑
䎳䏘䏖䏋䎃䎵䏌䏙䏈䏗
䎕䎘
䎕䎗
䎔䎓
䎔䎕
䎔䎘
䎔䎙
䎔䎗
Click on the first or last page to see other LC-40LU700E (serv.man7) service manuals if exist.