Read Sony DCR-DVD408 (serv.man2) Service Manual online
MANUAL DE SERVIÇO
Sony EMCS Co.
LEVEL
2
Link
NOTA DE SERVIÇO
TABELA DE INFORMAÇÃO DO MODELO
ESPECIFICAÇÕES
DIAGRAMA DAS PLACAS
DIAGRAMAS EM BLOCOS
DESMONTAGEM
PLACAS DE CIRCUITO IMPRESSO
LISTA DE PEÇAS PARA REPARO
DIAGRAMAS ESQUEMÁTICOS
Link
Revision History
Revision History
Acrobat Reader
Instruções do
Acrobat Reader
DCR-DVD408_L2
Ver 1.0 2007.01
DIGITAL VIDEO CAMERA RECORDER
2007A0200-1
© 2007.01
Publicado por Sony Brasil Ltda.- Engenharia de Qualidade
9-
890-087-31
Brazilian Model
RMT-835
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
• Precaução para reparo da placa VC-478
DCR-DVD408
— 3 —
DCR-DVD408_L2
ENGLISH
JAPANESE
ENGLISH
JAPANESE
ESPECIFICAÇÕES
System
Video compression format
MPEG2/JPEG (Still images)
Audio compression format
Dolby Digital 2/5.1ch
Dolby Digital 5.1 Creator
Dolby Digital 5.1 Creator
Video signal
NTSC color, EIA standards
Usable discs
8 cm DVD-RW/DVD+RW/DVD-R/DVD+R DL
Recording format
Movie
DVD-RW: DVD-VIDEO (VIDEO mode),
DVD-RW: DVD-VIDEO (VIDEO mode),
DVD-Video Recording (VR mode)
DVD+RW: DVD+RW Video
DVD-R/DVD+R DL: DVD-VIDEO
DVD-R/DVD+R DL: DVD-VIDEO
Still image
Exif Ver.2.2*1
Exif Ver.2.2*1
Recording time
DVD-RW/DVD+RW/DVD-R
9M (HQ): Approx. 20 min
6M (SP): Approx. 30 min
3M (LP): Approx. 60 min
9M (HQ): Approx. 20 min
6M (SP): Approx. 30 min
3M (LP): Approx. 60 min
DVD+R DL:
9M (HQ): Approx. 35 min
6M (SP): Approx. 55 min
3M (LP): Approx. 110 min
9M (HQ): Approx. 35 min
6M (SP): Approx. 55 min
3M (LP): Approx. 110 min
Viewfinder
Electric viewfinder (color)
Image device (ClearVid CMOS Sensor)
DCR-DVD408
CMOS: 5.9 mm (1/3 type)
Recording pixels (still, 4:3):
Max. 4.0 mega (2 304
Recording pixels (still, 4:3):
Max. 4.0 mega (2 304
× 1 728) pixels*2
Gross: Approx. 2 100 000 pixels
Effective (movie, 16:9): 1 430 000 pixels
Effective (movie, 4:3): 1 080 000 pixels
Effective (still, 16:9): 1 490 000 pixels
Effective (still, 4:3): 1 990 000 pixels
Effective (movie, 16:9): 1 430 000 pixels
Effective (movie, 4:3): 1 080 000 pixels
Effective (still, 16:9): 1 490 000 pixels
Effective (still, 4:3): 1 990 000 pixels
Lens
Carl Zeiss Vario-Sonnar T
*
10
× (Optical), 20 × , 80 × *3 (Digital)
Filter diameter: 37 mm (1 1/2 in.)
Focal length
DCR-DVD408
F1.8 - 2.9
f=5.1 - 51 mm (7/32 - 2 1/8 in.)
When converted to a 35 mm still camera
For movies *4 :
41.3 - 485 mm (1 11/16 - 19 1/8 in.) (16:9)
50.5 - 594 mm (2 - 23 1/2 in.) (4:3)
For still images:
37 - 370 mm (1 1/2 - 14 5/8 in.) (4:3)
40.4 - 404 mm (1 5/ in.) (16:9)
f=5.1 - 51 mm (7/32 - 2 1/8 in.)
When converted to a 35 mm still camera
For movies *4 :
41.3 - 485 mm (1 11/16 - 19 1/8 in.) (16:9)
50.5 - 594 mm (2 - 23 1/2 in.) (4:3)
For still images:
37 - 370 mm (1 1/2 - 14 5/8 in.) (4:3)
40.4 - 404 mm (1 5/ in.) (16:9)
Color temperature
[AUTO], [ONE PUSH],
[INDOOR] (3 200 K),
[OUTDOOR] (5 800 K)
[INDOOR] (3 200 K),
[OUTDOOR] (5 800 K)
Minimum illumination
1.5 lx (lux) (AUTO SLW SHUTTR ON,
Shutter speed 1/30 second)
0 lx (lux) (during NightShot function)
Shutter speed 1/30 second)
0 lx (lux) (during NightShot function)
*1``Exif" is a file format for still images,established by
the JEITA (Japan Electronics and Information
Technology Industries Association). Files in this
format can have additional information such as
your camcorderÅfs setting information at the time
of recording.
Technology Industries Association). Files in this
format can have additional information such as
your camcorderÅfs setting information at the time
of recording.
*2 The unique pixel array of Sony's ClearVid CMOS
Sensor and image processing system (new Enhanced
Imaging Processor) allows still image resolution
equivalent to the sizes described.
Imaging Processor) allows still image resolution
equivalent to the sizes described.
*3 DCR-DVD408
*4 The focal length figures are actual figures resulting
from wide angle pixel readout.
• Manufactured under license from Dolby Laboratories.
Input/Output connectors
Audio/Video output
10-pin connector
Video signal: 1 Vp-p, 75
Video signal: 1 Vp-p, 75
Ω (ohms)
Luminance signal: 1 Vp-p, 75
Ω (ohms)
Chrominance signal: 0.286 Vp-p, 75
Ω (ohms)
Audio signal: 327 mV (at load impedance 47 k
Ω
(kilohms)),
Output impedance with less than 2.2 k
Output impedance with less than 2.2 k
Ω (kilohms)
USB jack
mini-B
REMOTE jack
Stereo mini-minijack (Ø 2.5 mm)
LCD screen
Image
6.9 cm (2.7 type, aspect ratio 16:9)
Total dot number
211 200 (960
× 220)
General
Power requirements
DC 6.8 V/7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
DC 8.4 V (AC Adaptor)
Average power consumption
DCR-DVD408
During camera recording using the viewfinder with
normal brightness:
4.0 W
During camera recording using theLCD with
normal brightness:
4.2 W
normal brightness:
4.0 W
During camera recording using theLCD with
normal brightness:
4.2 W
Operating temperature
0
°C to +40 °C (32 °F to 104 °F)
Storage temperature
-20
°C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
70
× 87 × 142 mm
(2 7/8
× 3 1/2 × 5 5/8 in.) (w/h/d)
including the projecting parts
70
70
× 87 × 145 mm
(2 7/8
× 3 1/2 × 5 5/8 in.) (w/h/d)
including the projecting parts, the NPFH60
rechargeable battery pack attached
rechargeable battery pack attached
Mass (approx.)
DCR-DVD408
490 g (1 lb 1 oz) main unit only
570 g (1 lb 4 oz) including the NPFH60
rechargeable battery pack and a disc
570 g (1 lb 4 oz) including the NPFH60
rechargeable battery pack and a disc
Supplied accessories
AC Adaptor (1)
Power code (1)
A/V connecting cable (1)
USB cable (1)
Wireless Remote Commander (1)
Rechargeable battery pack NP-FH60 (1)
Power code (1)
A/V connecting cable (1)
USB cable (1)
Wireless Remote Commander (1)
Rechargeable battery pack NP-FH60 (1)
CD-ROM
``
Handycam Application Software
"
(1)
Operating Guide (This manual) (1)
AC Adaptor AC-L200/L200B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V*
Operating temperature
0
°C to +40 °C (32 °F to 104 °F)
Storage temperature
-20
°C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
48
× 29 × 81 mm
(1 15/16
× 1 3/16 × 3 1/4 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
170 g (6 oz) excluding the power cord
* See the label on the AC Adaptor for other specifications.
Rechargeable battery pack NP-FH60
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
7.2 Wh (1 000 mAh)
Dimensions (approx.)
31.8
× 33.3 × 45.0 mm
(1 5/16
× 1 5/16 × 1 13/16 in.) (w/h/d)
Mass (approx.)
80 g (2.9 oz)
Operating temperature
0
°C to +40 °C (32 °F to 104 °F)
Type
Lithium ion
Design and specifications are subject to change without
notice.
notice.
— 5 —
DCR-DVD408_L2
Tabela de infermação do modelo
• Abbreviation
AR
: Argentine model
AUS : Australian model
BR
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
EE
EE
: East European model
HK : Hong Kong model
JE
JE
: Tourist model
KR
: Korea model
MX : Mexican model
NE
NE
: North European model
Model DCR-DVD408 DCR-DVD408 DCR-DVD408E DCR-DVD506E DCR-DVD508
Destination
BR
Color system
NTSC PAL PAL NTSC
CMOS
1/3 type
1/3 type
1/3 type
1/2.7 type
1/2.7 type
Recording pixels
4.0Μ pixels
4.0Μ pixels
4.0Μ pixels
6.1Μ pixels
6.1Μ pixels
(Max)
CM board
CM-076
CM-076
CM-076
CM-077
CM-077
LD board
LD-215
LD-215
LD-215
LD-216
LD-216
Model
DCR-DVD508E
DCR-DVD808
DCR-DVD808E
DCR-DVD908
DCR-DVD908E
Destination
NE, JE
E, KR
E, HK, AUS, CH
E, KR
E, HK, AUS, CH
Color system
PAL
NTSC
PAL
NTSC
PAL
CMOS
1/2.7 type
1/3 type
1/3 type
1/2.7 type
1/2.7 type
Recording pixels
6.1Μ pixels
4.0Μ pixels
4.0Μ pixels
6.1Μ pixels
6.1Μ pixels
(Max)
CM board
CM-077
CM-076
CM-076
CM-077
CM-077
LD board
LD-216
LD-215
LD-215
LD-216
LD-216
— 6 —
DCR-DVD408_L2
ENGLISH
ENGLISH
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
