Read Sharp LC-40LU700E (serv.man7) Service Manual online
LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
4 – 8
7. Removing of Bezel Ass’y, Panel Chassis Ass’y, Optical Sheet, Lens Sheet, Diffusion Plate, Back Light Chas-
sis and LCD Control Unit (32 inch models).
sis and LCD Control Unit (32 inch models).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 10 lock screws
,10 lock screws
and detach the Bezel Ass’y
.
2. Detach the 32” LCD Panel HIRAKI Unit and Panel Chassis Ass’y
.
3. Detach the Optical sheet
and Lens Sheet
and Micro Lens Sheet
Diffusion Plate
.
4. Remove the 16 Push Rivets
and 4 Support Pins
and detach the Reflection Sheet
.
5. Remove the 32 Push Rivets
.
6. Remove the 8 Terminators
and 8 connections
and detach the 4 LED8 PWB1 Units
and 4 LED8 PWB2 Units
.
7. Detach the 4 LED5 PWB1 Units
and 4 LED5 PWB2 Units
.
8. Disconnect the connecting cords from the 8 connectors
of the LED5 PWB1/2 Unit.
9. Detach the Back Light Chassis
.
10.Detach the 2 Connecting Cord
and 2 Ferrite Core
.
11.Remove the 6 lock screws
and detach the LCD Control Unit
䎳䏄䏑䏈䏏䎃䎃䎦䏋䏄䏖䏖䏌䏖䎃
䎤䏖䏖䎊䏜
䎤䏖䏖䎊䏜
䎖䎕䎅䎃䎯䎦䎧
䎳䏄䏑䏈䏏䎃䎫䎬䎵䎤䎮䎬䎃䎸䏑䏌䏗
䎳䏄䏑䏈䏏䎃䎫䎬䎵䎤䎮䎬䎃䎸䏑䏌䏗
䎥䏈䏝䏈䏏䎃䎤䏖䏖䎊䏜
䎯䏈䏑䏖䎃䎶䏋䏈䏈䏗
䎲䏓䏗䏌䏆䏄䏏䎃䎶䏋䏈䏈䏗
䎰䏌䏆䏕䏒䎃䎯䏈䏑䏖䎃䎶䏋䏈䏈䏗
䎵䏈䏉䏏䏈䏆䏗䏌䏒䏑䎃䎶䏋䏈䏈䏗
䎶䏘䏓䏓䏒䏕䏗䎃䎳䏌䏑
䎳䏘䏖䏋䎃䎵䏌䏙䏈䏗
䎔
䎕
䎖
䎗
䎘
䎙
䎚
䎧䏌䏉䏉䏘䏖䏌䏒䏑䎃䎳䏏䏄䏗䏈 䎛
䎔䎓
䎜
䎔䎔
䎔䎕
䎔䎘
䎔䎖
䎔䎗
䎔䎙
䎔䎚
䎔䎛
䎔䎜
䎕䎓
䎕䎔
䎕䎕
䎥䏄䏆䏎䎃䎯䏌䏊䏋䏗䎃
䎦䏋䏄䏖䏖䏌䏖
䎦䏋䏄䏖䏖䏌䏖
䎩䏈䏕䏕䏌䏗䏈䎃䎦䏒䏕䏈
䎦䏒䏑䏑䏈䏆䏗䏌䏑䏊䎃䎦䏒䏕䏇
䎯䎦䎧䎃䎦䏒䏑䏗䏕䏒䏏䎃
䎸䏑䏌䏗 䎕䎗
䎸䏑䏌䏗 䎕䎗
䎕䎖
Click on the first or last page to see other LC-40LU700E (serv.man7) service manuals if exist.