LC-37X20E (serv.man10) - Sharp TV User Guide / Operation Manual. Page 23

HDMI cable

HDMI cable

HDMI cable

Optical AUDIO 
cable

If this is activated, the One Touch Play function 
is enabled. While the TV is in standby mode, it 
automatically turns on and plays back the image from 
the HDMI source.

Press MENU and the menu screen displays.

Press 

c/d to select “Option”.

Press 

a/b to select “AQUOS LINK Setup”, and 

then press OK.

Press 

a/b to select “Auto Power On”, and 

then press OK.

Press 

c/d to select “On”, and then press OK.

NOTE
•  The factory default for this item is “Off”.

Here, you can select a recorder for the recording from 
several connected recorders.

Repeat steps 1 to 3 in AQUOS LINK Auto 
power on.

Press 

a/b to select “Selecting Recorder”, and 

then press OK.

Select the recorder, and then press OK.

NOTE
•  If you have connected the AQUOS AUDIO speaker system 

between the TV and an AQUOS Recorder, the external 
source’s indication changes from “EXT5” to “EXT5 (Sub)”.

This function allows you to automatically switch to 
the appropriate sound mode depending on the genre 
information included the digital broadcast.

Repeat steps 1 to 3 in AQUOS LINK Auto 
power on.

Press 

a/b to select “Using Genre Info.”, and 

then press OK.

Press 

c/d to select “On”, and then press OK.

First connect the AQUOS AUDIO speaker system or an AQUOS BD Player/AQUOS Recorder that supports the 
HDMI CEC protocol.

NOTE
•  Refer to the operation manual of the device to be connected for further details.
•  After unplugging connection cables or changing the connection pattern, first turn on the power of the TV with all relevant 

device’s power turned on. Change the external input source by pressing 

b, select the appropriate external source and 

verify the audiovisual output.

•  The cables illustrated in the following explanation are commercially available items.

LC-3237X20E-gb.indd   21

LC-3237X20E-gb.indd   21

2007/08/31   16:58:23

2007/08/31   16:58:23