LC-37X20E (serv.man10) - Sharp TV User Guide / Operation Manual. Page 21

In order to receive coded digital stations, a Common 
Interface Module (CI Module) and a CA Card must be 
inserted in the CI slot of your TV set. (Page 8)
The CI Module and the CA Card are not supplied 
accessories. They are usually available from your 
dealer.

With the side with the gold coloured contact 
chip facing the side of the CI Module marked 
with the provider’s logo, push the CA Card 
into the CI Module as far as it will go. Note the 
direction of the arrow printed on the CA Card.

Carefully insert the CI Module in the CI slot with 
the contact side forward.

 

The logo on the CI Module 
must be facing forward from 
the rear of the TV. Do not use 
excessive force. Make sure 
the module is not bent in the 
process.

NOTE
•  Make sure that the CI Module is properly inserted.
•  This menu is only available for digital stations.

Press MENU and the menu screen displays.

Press 

c/d to select “Digital Setup”.

•  The content of this menu depends on the provider of 

the CI Module.

Press 

a/b to select “CI Menu”, and then press 

OK.

Press 

a/b to select the following desired item, 

and then press OK.

E 

General information on CI Module displays.

E 

Adjustment parameters of each CA CARD displays.

E 

You can input numerical values such as passwords 
here.

NOTE
• The content of each screen depends on the 

manufacturer of the CI module.

Remove the cover from the rear of 
the set.

Remove the module from the set.

Replace the cover.

LC-3237X20E-gb.indd   19

LC-3237X20E-gb.indd   19

2007/08/31   16:58:18

2007/08/31   16:58:18