LC-37X20E (serv.man10) - Sharp TV User Guide / Operation Manual

Model
LC-37X20E (serv.man10)
Pages
44
Size
7.3 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
TV / LCD
File
lc-37x20e-sm10.pdf
Date

View Sharp LC-37X20E (serv.man10) User Guide / Operation Manual online

LC-32X20E
LC-32X20S
LC-37X20E
LC-37X20S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
SHARP CORPORATION
Printed in Poland
Gedruckt in Polen
Imprimé en Pologne
Stampato in Polonia
Gedrukt in Polen
Impreso en Polonia
TINS-D198WJZZ
07P09-PL-NG
LC-32X20E/LC-37X20E
LC-32X20S/LC-37X20S
OPERA
TION MANUAL / BEDIENUNGSANLEITUNG / MODE D'EMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO
Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
D198WJZZ
1
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
PIN
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
ESP
AÑOL
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fi tted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the 
fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked 
 or 
ASA
 and of the same rating as above, 
which is also indicated on the pin face of the plug, must be used.
Always refi t the fuse cover after replacing the fuse. Never use the plug without the fuse cover fi tted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains 
plug and fi t an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a 
safe manner. 
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric 
shock may occur.
To fi t an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral     
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings 
identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
• The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
• If the new fi tted plug contains a fuse, its value is the same as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
  ( 776.0 ) / [ 898.0 ]
  ( 776,0 ) / [ 898,0 ]
  ( 701.5 ) / [ 824.4 ]
  ( 701,5 ) / [ 824,4 ]
(
130.0
)
(
130,0
)
[
156.7
]
[
156,7
]
 (
332.0
)
/
[
369.0
]
 (
332,0
)
/
[
369,0
]
 (
517.0
)
/
[
581.0
]
 (
517,0
)
/
[
581,0
]
 (
572.0
)
/
[
638.0
]
 (
572,0
)
/
[
638,0
]
480.0
480,0
300.0
300,0
300.0
300,0
276.0
276,0
99.0
99,0
94.6
94,6
(55.0)
(55,0) 
 (
396.0
)
/
[
464.0
]
 (
396,0
)
/
[
464,0
]
15°
15°
[57.0]
[57,0]
:LC-32X20E/LC-32X20S
:LC-37X20E/LC-37X20S
(    ) :  LC-32X20E/LC-32X20S
[    ] : LC-37X20E/LC-37X20S 
 
 : 
LC-32X20E/LC-32X20S
  
LC-37X20E/LC-37X20S
OPERATION MANUAL
Contents .........................................................................................1
Introduction ....................................................................................2
Dear SHARP customer .............................................................2
Important Safety Precautions ....................................................2
Trademarks ...............................................................................2
Remote control unit...................................................................3
TV (Front view) ..........................................................................4
TV (Rear view) ...........................................................................4
Preparation ....................................................................................5
Supplied accessories ................................................................5
Attaching the stand unit ............................................................5
Inserting the batteries ................................................................6
Using the remote control unit ....................................................6
Cautions regarding the remote control unit ...........................6
Quick guide ....................................................................................7
Initial installation overview ..........................................................7
Before turning on the power......................................................8
Bundling the cables .............................................................8
Initial auto installation ................................................................9
Checking signal strength and channel strength ....................9
Watching TV .................................................................................10
Daily operation ........................................................................10
Switching on/off .................................................................10
Switching between analogue and digital broadcasts ..........10
Changing channels ............................................................10
Selecting external video source ..........................................10
Selecting Sound mode ......................................................10
EPG (Electronic Programme Guide) .........................................11
EPG Overview .........................................................................11
Useful settings for using EPG ..................................................11
Selecting a programme using EPG..........................................12
Timer recording using EPG .....................................................13
Cancelling the timer recording .................................................13
Teletext ...................................................................................14
Using the MHEG5 application (UK only) ..................................14
Connecting external devices ......................................................15
Introduction to connections .....................................................15
HDMI connection ...............................................................16
Component connection .....................................................16
S-VIDEO/VIDEO connection ..............................................16
SCART connection ............................................................17
Controlling devices with SCART using AV Link  ..................17
Speaker/amplifier connection .............................................18
Inserting a CA Card .................................................................19
AQUOS LINK ................................................................................20
Controlling HDMI devices using AQUOS LINK .........................20
AQUOS LINK connection ........................................................21
AQUOS LINK Setup ................................................................21
Operating an AQUOS LINK device ..........................................22
Menu operation............................................................................23
What is the Menu? ..................................................................23
Common operations ..........................................................23
Basic adjustment .........................................................................24
Picture Settings .......................................................................24
AV Mode ............................................................................25
Audio Settings ........................................................................25
Power Save Settings ...............................................................25
Channel Settings .....................................................................26
Auto Installation .................................................................26
Digital channel settings ......................................................26
Analogue channel settings .................................................27
Password/Parental lock settings ........................................28
Language Settings (language, subtitle, multi audio) .................28
Useful Viewing functions ............................................................29
Selecting the WSS picture size automatically .....................29
Selecting the WSS picture size manually ............................29
Selecting the picture size manually .....................................29
Selecting the recording picture size manually .....................30
Selecting the HDMI picture size automatically ....................30
Other Picture and audio settings .............................................30
Adjusting image position ....................................................30
Reducing noise on the screen ............................................30
Automatic volume adjustment ............................................30
Clear Voice ........................................................................30
Audio Only .........................................................................30
Display Settings ......................................................................31
Channel display .................................................................31
Time and Title display ........................................................31
Other useful features ..................................................................32
Setting when using external devices .......................................32
Input source settings .........................................................32
Skipping specified input .....................................................32
Colour system settings ......................................................32
Additional features ..................................................................32
Connecting a PC ..........................................................................33
Connecting a PC ....................................................................33
Displaying a PC image on the screen ......................................33
Selecting the picture size ...................................................33
Adjusting the PC image automatically ................................34
Adjusting the PC image manually .......................................34
Selecting input resolution ........................................................34
RS-232C port specifications ...................................................35
PC compatibility chart .............................................................36
RS-232C command list...........................................................36
Appendix ......................................................................................37
Troubleshooting ......................................................................37
Updating your TV via DVB-T ...................................................38
Reset ......................................................................................38
Identification............................................................................38
Specifications .........................................................................39
Optional accessory .................................................................39
End of life disposal ..................................................................40
ENGLISH
Contents
•  The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the 
actual operations.
•  The examples used throughout this manual are based on the LC-37X20E model.
ENGLISH
 1
LC-3237X20E-gb.indd   1
LC-3237X20E-gb.indd   1
2007/08/31   16:57:12
2007/08/31   16:57:12
•  “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI 
Licensing LLC.”
Introduction
•  Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. 
Do not use liquid cleaners or aerosol cleaners.
•  Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, 
swimming pool and in a wet basement.
•  Do not place vases or any other water-filled containers on this product.
  The water may spill onto the product causing fire or electric shock.
•  Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the 
product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, 
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When 
mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting 
hardware recommended by the manufacturer.
•  When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, 
excessive force and uneven floor surface can cause the product to fall from the cart.
•  Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or 
block these vents and openings since insufficient ventilation can cause overheating and/or shorten the 
life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they 
can block ventilation openings. This product is not designed for built-in installation; do not place the 
product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the 
manufacturer’s instructions are followed.
•  The LCD panel used in this product is made of glass. Therefore, it can break when the product is 
dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
•  Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating 
products (including amplifiers).
•  To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
•  To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
•  Do not display a still picture for a long time, as this could cause an afterimage to remain.
•  There is power consumption always if main plug is connected.
•  Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high 
voltage and other dangerous conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a 
fixed point of blue, green or red.
This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two 
people holding it with two hands — one hand on each side of the TV.
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
•  Manufactured under license from Dolby Laboratories.
•  “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
•  The “HD ready 1080P” Logo is a trademark of EICTA.
•  The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project.
Trademarks
Important Safety Precautions
Dear SHARP customer
•  TruSurround XT, SRS and 
h symbol are trademarks of SRS Labs, Inc.
 2
LC-3237X20E-gb.indd   2
LC-3237X20E-gb.indd   2
2007/08/31   16:57:15
2007/08/31   16:57:15
Introduction
15
16
17
18
19
20
21
22
23
24
25
4
3
2
5
6
7
8
9
10
11
12
13
14
1
B (Standby/On) (Page 10)
Buttons for useful operations
 
m (Teletext)
 
ATV: Display analogue teletext. (Page 14)
 
DTV: Select MHEG-5 and teletext for DTV. 
(Page 14)
 
k (Reveal hidden Teletext) (Page 14)
 
[ (Subtitle)
 
ATV/DTV/External: Switch subtitle 
languages on/off. (Pages 14 and 28)
 
3 (Freeze/Hold)
 
Press to freeze a moving image on the 
screen.
 
TELETEXT: Stop updating Teletext pages 
automatically or release the hold mode.
 
1 (Subpage) (Page14)
 
v (Top/Bottom/Full)
 
Set the area of magnification in teletext 
mode. (Page 14)
0 - 9 numeric buttons
 
Set the channel.
 
Enter desired numbers.
 
Set the page in teletext mode.
A (Flashback)
 
Press to return to the previous image in 
normal viewing mode.
5 DTV
 
Press to access DTV mode.
6 ATV
 
Press to access conventional analogue TV 
mode.
(Sound mode)
 
Select the sound multiplex mode. (Page 10)
i (
k/l) (Volume)
 
Increase/decrease TV volume.
e (Mute)
 
TV sound on/off
10 
f (WIDE MODE)
 
Select the wide mode. (Pages 29 and 33)
11 AV MODE
 
Select a video setting. (Page 25)
12 
a/b/c/d (Cursor)
 
Select a desired item on the setting 
screen.
 OK
 
Execute a command within the menu 
screen.
 
ATV/DTV: Display the programme list 
when no other menu screen is running.
13 END
 
Exit the menu screen.
14  R/G/Y/B (Colour) buttons
 
On the menu screen, the coloured buttons 
are correspondingly used to select the 
coloured items on the screen. (e.g. EPG, 
MHEG-5, TELETEXT)
15 
b (INPUT SOURCE)
 
Select an input source. (TV, EXT1, EXT2, 
EXT3, EXT4, EXT5, EXT6, EXT7, EXT8) 
(Page 10)
16 EPG
 
DTV: Display the EPG screen. (Pages 11 
- 13)
17 RADIO
 
DTV: Switch between Radio and Data 
mode.
•  When only data broadcasting (no 
radio broadcasting) is transmitted by 
DVB, switching to Data mode will be 
performed.
18 P. INFO
 
Press to display programme information 
which is transmitted through digital video 
broadcasting in the upper left corner of 
the screen. (DTV only)
19 P (
r/s)
 
Select the TV channel. 
20 
p (Display information) 
 
Press to display the station information 
(channel number, signal, etc.) in the upper 
right corner of the screen. (Page 31)
21 SLEEP
 
Press to schedule a time for the TV to 
automatically standby. (Page 26)
22 MENU
 
ATV/DTV: Menu screen on/off.
23 
6 (Return)
 
Return to the previous menu screen.
24 ACTION (Action Mode)
 
This key does not work on this model.
25  AQUOS LINK buttons
 
If external equipment such as a AQUOS 
BD Player is connected via HDMI cables 
and is AQUOS LINK compatible, you can 
use these AQUOS LINK buttons. See 
pages 20 and 22 for details.
Remote control unit
 3
LC-3237X20E-gb.indd   3
LC-3237X20E-gb.indd   3
2007/09/14   13:31:33
2007/09/14   13:31:33
Introduction
16
12
13
14
7
8
9
10
11
1
2
3
4
5
6
15
12
  EXT 3 terminals
13
 Headphones
14
 SERVICE socket
15
  COMMON INTERFACE slot
16
  AC INPUT terminal
7
 
EXT 6 (HDMI/AUDIO) terminals
8
 RS-232C 
terminal
9
 
EXT 8 (COMPONENT/AUDIO) terminals
10
  EXT 2 (RGB) terminal
11
  EXT 1 (RGB) terminal
1
 
EXT 4 (HDMI) terminal
2
 
EXT 5 (HDMI) terminal
3
 
EXT 7 (ANALOGUE RGB/AUDIO) terminals
4
 
DIGITAL AUDIO OUTPUT terminal
5
 
OUTPUT (AUDIO) terminals
6
 Antenna 
terminal
TV (Front view)
TV (Rear view)
 4
Remote control sensor
OPC sensor
OPC indicator
SLEEP indicator
B (Standby/On) 
indicator
MENU
 button
a (Power) button
i (
k/l)  Volume buttons
P
 (
r/s)
Programme [channel] buttons
b (INPUT SOURCE) button
LC-3237X20E-gb.indd   4
LC-3237X20E-gb.indd   4
2007/08/31   16:57:18
2007/08/31   16:57:18
Preparation
Supplied accessories
Attaching the stand unit
•  Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•  Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•  Attach the stand in the correct direction.
•  Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Insert the stand into the openings on the  
 
bottom of the TV. (Hold the stand so it will  
 
not drop from the edge of the base area.)
 
2 Insert and tighten the 4 screws into the   
 
4 holes on the rear of the TV.
3
1
2
Confirm that there are 10 screws with the stand 
unit.
1
Attach the supporting post for the stand unit 
onto the base using the 6 screws with the screw 
driver (supplied) as shown.
2
NOTE
•  To detach the stand unit, perform the steps in reverse 
order.
 5
Remote control unit 
(
g1)
AC cord
Stand unit (
g1)
Cable clamp (
g1)
Pages 3 and 6
Page 5
Page 8
Page 8
•  Operation manual (This publication)
•  “AAA” size battery (
g2) ... Page 6
(For Europe, except 
U.K. and Eire)
(For U.K. and Eire)
U.K. type 3-pin AC cord is only included with 
models LC-32X20E and LC-37X20E.
Soft 
cushion
LC-3237X20E-gb.indd   5
LC-3237X20E-gb.indd   5
2007/08/31   16:57:21
2007/08/31   16:57:21
Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become 
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size batteries.
•  Place batteries with their terminals corresponding 
to the (
k) and (l) indications in the battery 
compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
•  Do not mix batteries of different types. Different types of batteries have different characteristics.
•  Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical 
leakage in old batteries.
•  Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any 
chemical leakage, wipe thoroughly with a cloth.
•  The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
•  If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household 
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial 
businesses.
1
2
3
Using the remote control unit
Use the remote control unit by pointing it 
towards the remote control sensor. Objects 
between the remote control unit and sensor 
may prevent proper operation.
30°
30°
Cautions regarding the remote control unit
•  Do not expose the remote control unit to shock.
  In addition, do not expose the remote control unit to liquids, and do not place in an area 
with high humidity.
•  Do not install or place the remote control unit under direct sunlight. The heat may cause 
deformation of the unit.
•  The remote control unit may not work properly if the remote control sensor of the TV is 
under direct sunlight or strong lighting. In such case, change the angle of the lighting or 
TV, or operate the remote control unit closer to the remote control sensor.
 6
5 m
Remote control sensor
LC-3237X20E-gb.indd   6
LC-3237X20E-gb.indd   6
2007/08/31   16:57:26
2007/08/31   16:57:26
Quick guide
Initial installation overview
Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary 
depending on your TV installation and connection.
Preparation
n
  Connect antenna cable to the 
antenna terminal. (Page 8)
o
  If necessary, insert CA card 
into the CI slot to watch 
scrambled broadcasts. 
(Pages 8 and 19)
p
  Connect the AC cord to the 
TV. (Page 8)
n
  Turn on the TV power with 
a. 
(Page 10)
o
  Run the initial auto installation. 
(Page 9)
✔ Language setting
English
Italiano
Svenska
✔ Country setting
Austria A  B/G
Finland  FIN B/G
Greece GR 
B/G
✔  Channel search setting
Analogue Search
Digital Search
n
  Congratulations! 
 
Now you can watch TV.
o
  If necessary, adjust the 
antenna to attain maximum 
signal reception. (Page 9)
n
 Connect external 
devices such as a 
DVD as instructed. 
(Pages 15 - 17)
o
 Connect external 
audio devices such 
as speakers/amplifier 
as instructed. 
(Pages 15 and 18)
1
Power on and 
run the auto 
installation
2
Watch TV
3
Start searching 
channels
Connect 
external devices
 7
LC-3237X20E-gb.indd   7
LC-3237X20E-gb.indd   7
2007/08/31   16:57:31
2007/08/31   16:57:31
Before turning on the power
Quick guide
Supplying power to the antenna
You must supply power to the antenna in order to 
receive digitally/terrestrially broadcast stations after 
connecting the antenna cable to the antenna input 
terminal on the back of your TV.
1.
 Press MENU and the menu screen displays.
2.
 Press 
c/d to select “Setup”.
3.
 Press 
a/b to select “Antenna Setup-DIGITAL”, 
and then press OK.
4.
 Press 
a/b to select “Supply Voltage”, and then 
press OK
5.
 Press 
c/d to select “On”, and then press OK.
Setting the TV on the wall
•  This TV should be mounted on the wall only with the wall mount bracket and attachment available from SHARP. 
(Page 39) The use of other wall mount brackets may result in an unstable installation and may cause serious 
injuries.
•  Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. 
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting 
or mounting that results in accident or injury.
•  You can ask a qualified service personnel about using an optional bracket and attachment to mount the TV to the wall.
•  To use this TV mounted on a wall, first remove the adhesive tape at the 2 locations on the rear of the TV, and then use the 
screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
•  When you mount the TV on the wall, you should attach the supporting post.
* Ferrite Core
The Ferrite Core should be permanently attached 
and never removed from the AC cord.
Bundling the cables
 8
1
. Carefully insert the 
CI Module in the CI slot 
with the contact side 
forward.
Cable clamp
Bundle the 
cables with the 
clamp.
AC cord
Ferrite core*
Place the TV close to the 
AC outlet, and keep the 
power plug within reach.
Standard DIN45325 
plug (IEC 169-2) 
75 
q coaxial cable
(For Europe, except 
U.K. and Eire)
(For U.K. and Eire)
2
. The logo on the CI 
Module must be facing 
forward from the rear of 
the TV.
LC-3237X20E-gb.indd   8
LC-3237X20E-gb.indd   8
2007/09/14   13:31:36
2007/09/14   13:31:36

Download Sharp LC-37X20E (serv.man10) User Guide / Operation Manual

Here you can view online and download Sharp LC-37X20E (serv.man10) User Guide / Operation Manual in PDF. LC-37X20E (serv.man10) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp LC-37X20E (serv.man10) LCD. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.