Read Sharp LC-37X20E (serv.man10) User Guide / Operation Manual online
SCART connection
Connecting external devices
E
When using the EXT 1 (SCART) terminal
E
When using the EXT 2 (SCART) terminal
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR using a fully wired
SCART cable.
systems, you can connect the VCR using a fully wired
SCART cable.
Controlling devices with SCART using AV Link
This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual
equipment.
equipment.
One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source
(e.g. VCR, DVD).
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source
(e.g. VCR, DVD).
TV Standby
When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD) enters standby mode
as well.
When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD) enters standby mode
as well.
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2 terminal.
Automatically transfers the channel preset information from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2 terminal.
NOTE
• Refer to the operation manuals of external equipment the details.
• Only works when the audiovisual equipment is connected to the EXT 2 terminal on the TV with AV Link via a fully wired
• Refer to the operation manuals of external equipment the details.
• Only works when the audiovisual equipment is connected to the EXT 2 terminal on the TV with AV Link via a fully wired
SCART.
• The use of the AV Link function is only possible if the TV-set has enforced a complete auto installation with the connected
audiovisual equipment. (Page 9, initial auto installation)
The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type
of equipment used, it is possible that the described functions may be completely or partially unusable.
Example of connectable devices
E Decoder
Example of connectable devices
E VCR E DVD recorder
NOTE
• In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which
• In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which
the decoder is connected in “Manual adjust” in the “Analogue Setting” menu. (Page 27)
• TV-VCR advanced AV Link systems may not be compatible with some external sources.
• Do not connect the decoder to the EXT2 terminal.
• You cannot connect the VCR with Decoder using a fully wired SCART cable when selecting “Y/C” under the EXT2 in the
• Do not connect the decoder to the EXT2 terminal.
• You cannot connect the VCR with Decoder using a fully wired SCART cable when selecting “Y/C” under the EXT2 in the
“Input Select” menu.
SCART cable
Decoder
SCART cable
SCART cable
Decoder
VCR
17
LC-3237X20E-gb.indd 17
LC-3237X20E-gb.indd 17
2007/08/31 16:58:13
2007/08/31 16:58:13
Click on the first or last page to see other LC-37X20E (serv.man10) service manuals if exist.