LC-37X20E (serv.man10) - Sharp TV User Guide / Operation Manual. Page 27

For viewing a video in monochrome.

The brightness level range of the OPC sensor’s 
automatic adjustments can be set according to your 
preferences. The adjustment range of the OPC sensor 
can be set to a maximum of 

k16 and a minimum of 

l16.

l16 through k16

l16 through k16

NOTE
•  This function is available only when the “OPC” setting is set 

to “On” or “On: Display”.

•  The maximum setting cannot be set to a smaller number 

than the minimum setting.

•  The minimum setting cannot be set to a bigger number 

than the maximum setting.

•  The maximum and minimum settings cannot be set to the 

same number.

•  Depending on the brightness of the surrounding light, the OPC 

sensor might not operate if the adjustment range is small.

You can adjust the sound quality to your preference 
with the following settings.

c button

d button

For weaker treble

For stronger treble

For weaker bass

For stronger bass

Decrease audio from 
the right speaker

Decrease audio from 
the left speaker

MENU  

[Audio]

Audio

Power Control

Balance

Treble

Surround

Reset

[   0]

[   0]

–15

L

+15

R

[Off]

Bass

[   0]

–15

+15

DYNAMIC

This function allows you to enjoy realistic “live” sound.

MENU    

[Power Control]

Power Control

Setup

No Signal Off

No Operation Off

Ecology

Sleep Timer

[Disable]

[Disable]

When set to “Enable” the TV will automatically enter the 
standby mode if there is no signal input for 15 minutes.

•  Five minutes before the TV enters standby mode, the 

remaining time displays every minute.

NOTE
•  When a TV programme finishes, this function may not 

operate.

AV Mode gives you five viewing options to choose from 
to best match the system environment, which can vary 
due to factors like room-brightness, type of programme 
watched or the type of image input from external 
equipment.

Press AV MODE.

Each time you press AV MODE, the mode 
changes.

•  You can also switch the mode on the “Picture” and 

“Audio” menu screen by pressing AV MODE.

For a highly defined image in a normally 

bright room.

For viewing a movie in a darkened room.

For playing of video games.

For PC.

Produce realistic colour on the TV screen unlike 

any other signal.

Allows the user to customise settings as desired. 

You can set the mode for each input source.

 For a clear-cut image emphasising 

high contrast for sports viewing. (The Picture and Audio 
settings cannot be adjusted.) Each setting value cannot 
be changed in this mode.

For a clear-cut image emphasising high 

contrast for sports viewing.

NOTE
•  The item marked with * is available only when selecting 

“EXT4”, “EXT5”, “EXT6” or EXT7” from the INPUT SOURCE 
menu.

•  The item marked with ** is available only when accepting 

an xvYCC signal through an HDMI terminal.

LC-3237X20E-gb.indd   25

LC-3237X20E-gb.indd   25

2007/08/31   16:58:34

2007/08/31   16:58:34