Read Sharp LC-32GA6E (serv.man5) User Guide / Operation Manual online
18
PC INPUT mode adjustments
TitleB
Menu operations
E
PICTURE/SOUND adjustments
After connecting the PC to your TV (see page 7), you can
adjust the “PICTURE” and “SOUND” modes to your
preference setting with the following steps.
adjust the “PICTURE” and “SOUND” modes to your
preference setting with the following steps.
1
Press b on the remote control unit to display the
“EXT. SOURCES MENU” screen.
“EXT. SOURCES MENU” screen.
2
Press a/b to select “PC INPUT”, and then press OK
to display PC image on your TV.
to display PC image on your TV.
3
For PICTURE setting:
Press MENU or Red to display PICTURE setting.
1 Press a/b to select your desired PICTURE item.
(CONTRAST/BRIGHTNESS/PHASE/CLOCK)
2 Press c/d to adjust the item to your desired position.
3 Press END to exit.
3 Press END to exit.
For SOUND setting:
Press Green to display SOUND setting.
1 Press a/b to select your desired SOUND item.
(VOLUME/BALANCE/LOUDNESS/DYNAMIC BASS/
MODE)
MODE)
2 Press c/d to adjust your desired position or select your
desired item.
3 Press END to exit.
E
Image position
After connecting the PC to your TV (see page 7), you can
adjust a picture’s horizontal or vertical position with the
following steps.
adjust a picture’s horizontal or vertical position with the
following steps.
1
Perfor m steps 1 to 2 in PICTURE/SOUND
adjustments.
adjustments.
2
Press a/b/c/d to centre the image by moving to
H.POS/V.POS.
H.POS/V.POS.
Resolution
Vertical Frequency 60Hz
O
O
O
O
O
O
O
O
O
640 g 400
720 g 400
640 g 480
848 g 480
800 g 600
1024 g 768
1280 g 720
1280 g 768
1280 g 1024
720 g 400
640 g 480
848 g 480
800 g 600
1024 g 768
1280 g 720
1280 g 768
1280 g 1024
VGA
WVGA
SVGA
XGA
WXGA
SXGA
E
PC compatibility chart
✔ POWER MANAGEMENT
Menu Operation: SETUP Group C (page 15)
When set to “ON”, the power will automatically shut down
(Standby mode) if no image signal is received from the PC
in the PC input mode.
(Standby mode) if no image signal is received from the PC
in the PC input mode.
E
POWER CONTROL
Power control setting allows you to save energy.
✔ NO SIGNAL OFF
Menu Operation: SETUP Group C (page 15)
When set to “ON”, the power will automatically shut down if
no signal inputs for 15 minutes.
no signal inputs for 15 minutes.
✔ NO OPERATION OFF
Menu Operation: SETUP Group C (page 15)
When set to “ON”, the power will automatically shut down if
no operation for 3 hours.
no operation for 3 hours.
Useful adjustment settings and features
LC-26/32/37GA6E(E)_c
05.6.29, 7:50 AM
18
Click on the first or last page to see other LC-32GA6E (serv.man5) service manuals if exist.