LC-32GA6E (serv.man5) - Sharp TV User Guide / Operation Manual. Page 13

E

You can set “DATE”, “TIME” (Clock), “ON TIMER” (Wake-up
timer) and “OFF TIMER” (Sleep timer) to automatically turn
on and off the TV or RADIO at the specified time.
You can also set “ON TIMER” to automatically turn on at the
specified sound volume.
The Timer functions that turn power on at the specified time
do not work unless the clock is adjusted. Be sure to adjust
the “DATE” and the “TIME” (Clock) first.

• “DATE” and “TIME” are automatically set/corrected via the

Teletext broadcast when available.

• When you set “ON TIMER”, the WAKE-UP indicator lights up red

while in the Standby mode.

• “ON TIMER” and “OFF TIMER” will not be activated if the power

is turned off with a (Power) on the TV.

• In the event of a power cut, disconnection from the plug or TV

switch, all the data on the “ON TIMER” and  “OFF TIMER” will be
cancelled.

• As a safety precaution, in the case of nobody being home when

the TV or RADIO switches on automatically, the TV will return to
Standby mode after 120 minutes; if it is to continue to run, any
button on the remote control functions should be pressed.

• The “OFF TIMER” data will be cancelled if you turn off the TV by

B (Standby/On) on the remote control unit.

• You can check the timer settings by pressing p (Display/ Info).

✔ DATE

✔ TIME

Current date and current time are necessary to set in order
to be able to run the Timer functions.

Automatic adjustment: If a programme with Teletext is being

received, the “DATE” and “TIME” can be adjusted automatically
with that signal’s clock.

Press m to synchronize “DATE” and “TIME”.

• If a signal via satellite is being received, or if correct date or

time, cannot be obtained, “DATE” and “TIME” will have to be
adjusted manually.

Manual adjustment: Press the Programme select (0–9) to adjust

“DATE” (DD/MM/YY (day/month/year)) and “TIME” (HH:MM
(hour:minute)) manually.

1 Select the programme you wish to record at the specified

time, using Programme select (0–9), Programmes List
(a/b) or P (r/s).

2 Perform steps 1 and 2 in Common Operation.
3 Press a/b to select “AV-LINK”, and then press OK.
4 Press a/b to select “AVL TIMERS”, and then press OK.
5 Press a/b to select the desired menu item (Example:

“DATE”, “START” etc).

6 Press c/d to  select/adjust or input 0–9.

1 Perform steps 1 and 2 in Common Operation.
2 Press a/b to select “CHILD LOCK”, and then press OK.
3 Press a/b to select “LOCK ALL”, “LOCK PROGRAM”,

and then press OK.

4 Input the desired four-digit “PIN” with 0–9, and then press

OK.

5 Press a/b to select the desired menu item (Example:

“TYPE”, “START” etc).

6 Press c/d to  select/adjust or input 0–9.

1 Perform steps 1 and 2 in Common Operation.
2 Press a/b to select “CHILD LOCK”, and then press OK.
3 Press a/b to select “CHANGE PIN”, and then press OK.
4 Input your PIN with 0–9, and then press OK.
5 Input new PIN with 0–9, and then press OK.

1 Perform steps 1 and 2 in Common Operation.
2 Press a/b to select “CHILD LOCK”, and then press OK.
3 Press  a/b to select “CLEAR LOCK”, and then press

OK .

4 Input your PIN with 0–9, and then press OK.

✔ ON TIMER 

(Wake-up timer)

The “ON TIMER” turns on the TV or RADIO automatically
anytime of the day.
When “ON TIMER” has been set, press B on the remote
control unit to put the TV into Standby mode.
When the preset time is reached, the TV or RADIO turns “ON”.
HH:MM (hour:minute)

• In order to use the “ON TIMER” (Wake-up timer), be sure to

deactivate all child protection beforehand, otherwise the “ON
TIMER” may not operate correctly.  You may have to input your
PIN in the corresponding menu.

✔ OFF TIMER 

(Sleep timer)

The “OFF TIMER” switches the TV to Standby mode
automatically, after the set length of time has passed.
Input selectable item OFF, 30, 60, 90, or 120 (minutes)

✔ RADIO/TV

For the “ON TIMER” (Wake-up timer), you can select  the
mode (TV or RADIO) to automatically turn on.

✔ VOL. LIMIT 

(VOLUME LIMIT)

For the “ON TIMER” (Wake-up timer), you can adjust the
sound volume when TV or RADIO automatically turns on.

E

This feature can only be used with NexTView, Smart Link,
Easy Link and Megalogic compatible VCR.
This “Intelligent” communication system allows controlling
some VCR functions from the TV and vice versa.
For example, it is possible to programme the VCR timer
recording from the TV or record the signal currently being
displayed on the TV regardless of the signal source.
In this case, the VCR and the TV must be connected through
the 21-pin Audio/Video connector especially available for
this function (EXT2 terminal in this TV) using the fully-wired
SCART cable.
Refer to your VCR operation manual for further information.

LC-26/32/37GA6E(E)_b

05.6.29, 7:50 AM

13