Read Sharp LC-32GA6E (serv.man5) User Guide / Operation Manual online
16
Menu operations
✔ MODE
Menu Operation: SETUP Group B (page 15)
This feature allows you to set the programmes to “TV”, “VCR”
or “SKIP” mode.
or “SKIP” mode.
TV: If the TV signal is weak the image can shake. In this case
put it in TV mode.
VCR: In some cases, the upper part of the picture may be
distorted when receiving signal from a VCR via RF terminal
on the TV set. Selecting this option will help to reduce this
effect.
on the TV set. Selecting this option will help to reduce this
effect.
SKIP: Allows you to SKIP programmes you do not want to view
when using P (r/s). (Use Programme Select (0–9) or
Programmes list (a/b) to display these channels)
Programmes list (a/b) to display these channels)
✔ SYSTEM
Menu Operation: SETUP Group B (page 15)
For more information, see the table “Corresponding real
channel” on page 23.
channel” on page 23.
✔ CHANNEL
Menu Operation: SETUP Group B (page 15)
NOTE
• Receivable channels depend on TV norm (Band, System, etc.),
installation site, and range.
E
EDIT
Menu Operation: SETUP Group C (page 15)
In this menu you can change the order of the channels,
delete channels, and change or give the channels an eight-
letter name. (See page 8.)
delete channels, and change or give the channels an eight-
letter name. (See page 8.)
1
Press c/d to select “TV” or “RADIO”.
2
Press a/b to select the channel you want to edit, and
then press OK to watch/listen to TV/radio.
then press OK to watch/listen to TV/radio.
3
Perform the steps below for each setting.
✔ FINE TUNE
Menu Operation: SETUP Group B (page 15)
When a preset programme channel is not exactly tuned,
you can fine-tune the channel in this mode.
you can fine-tune the channel in this mode.
✔ SCAN
Menu Operation: SETUP Group B (page 15)
NOTE
• Press and hold c/d, until the best tuning position is found, for
the best picture and sound, and then press OK to memorise.
Press c/d to “SCAN” between the existing channel and
the previous or next one.
the previous or next one.
• The tuning sequence will stop when a signal is detected.
• If the signal is not the required channel, press c/d to continue
• If the signal is not the required channel, press c/d to continue
searching.
• If the signal is the required channel, press OK to memorise.
For more information, see the table “Corresponding real
channel” on page 23.
channel” on page 23.
✔ EDIT
1 Press Red to display the “EDIT” setting.
2 Press a/b to change the letters, and then press c/d
2 Press a/b to change the letters, and then press c/d
for changing the position of the cursor.
3 Press OK to “STORE” the name.
4 Press END to exit.
4 Press END to exit.
NOTE
• The selected item is displayed in yellow letters with red
background.
• Letters A to Z of the alphabet, symbols, a blank space and the
numbers 0 to 9 will appear.
✔ DELETE
1 Press Yellow to display the “DELETE” setting.
2 Press OK to delete the channel selected on the list.
3 Press END to exit.
2 Press OK to delete the channel selected on the list.
3 Press END to exit.
NOTE
• When you delete a channel, the channels that follow it on the list
will automatically rearrange themselves by moving up one
programme (Pr) place, to restore the space of the cancelled
channel.
programme (Pr) place, to restore the space of the cancelled
channel.
✔ SORT
1 Press Blue to display the “SORT” setting.
2 Press a/b to move the channel to the required position
2 Press a/b to move the channel to the required position
(Pr).
3 Press OK to “STORE”.
NOTE
• When you change of site a channel, the located channels next
are rearranged. By such reason, it is advisable to order the
channels, being begun by which you wish to place in the first
position (Pr1).
channels, being begun by which you wish to place in the first
position (Pr1).
Item
Band
System
Real Channel Number
VHF
L/L’
CH-02 — CH-10
B/G
CH-02 — CH-20
I
CH-01 — CH-09
D/K
CH-02 — CH-12
UHF
B/G, D/K, I,
L/L’
L/L’
CH-21 — CH-69
CATV
L/L’
CC-01 — CC-74
B/G
CC-01 — CC-55
CH-75 — CH-79
I
CC-01 — CC-68
D/K
CC-01 — CC-41
LC-26/32/37GA6E(E)_b
05.6.29, 7:50 AM
16
Click on the first or last page to see other LC-32GA6E (serv.man5) service manuals if exist.