LC-32CT2E (serv.man3) - Sharp TV User Guide / Operation Manual. Page 13

English   - 13 -

• Touch “

” button to decrease volume or 

 

button to increase volume, so a volume level scale 
(slider) will be displayed on the screen.

• Touch “P/CH +” button to select the next programme or 

“P/CH -” button to select the previous programme.

• Touch the “MENU” button to enter main menu. In the 

main menu select sub-menu using “P/CH -” or “P/CH 
+” buttons and enter the sub-menu using “

” or 

“

” buttons. To learn the usage of the menus, 

refer to the menu system sections.

• Touch the “TV/AV” button in the control panel on the 

TV to switch between AV modes.

• The remote control of your TV is designed to control 

all the functions of the model you selected. The 
functions will be described in accordance with the 
menu system of your TV.

• Functions of the menu system are described in the 

following sections.

• Press “V+” button to increase the volume. Press “V -” 

button to decrease the volume. A volume level scale 
(slider) will be displayed on the screen.

• Press “P -” button to select the previous 

programme. 

• Press “P +” button to select the next programme.

• Press numeric buttons on the remote control to select 

programmes between 0 and 9. The TV will switch 
to the selected programme. To select programmes 
between 10 - 1000 (for IDTV) or 10-199 (for 
analogue), press the numeric buttons consecutively.
Press directly the programme number to reselect 
single digit programmes

Press the SOURCE button and select DTV from the 
list. The TV then switches to digital TV mode.

• Whenever you change the channel using the P + or 

P - button or numeric buttons, the TV displays the 
broadcast picture along with an information banner 
at the bottom of the screen. This will remain on the 
screen for approximately a few seconds. 

• The information banner can also be displayed by 

pressing the INFO button at any time while watching 
the TV. Pressing INFO button again removes the 
banner.

When info banner is on screen, you can use Up or 
Down cursor buttons to browse channels.

If the selected channel is locked, you must enter 
the correct four digit key to view the channel. In this 
case, a dialog box asking for the lock key will be 
displayed:

Some, but not all, channels send information about 
the current and next events. Please note that event 
information is updated automatically. If there are no 
event information data available for channels,EPG 
will be displayed with blanks.
• Press EPG button to view the EPG menu.
• Press “ ” or “ ” buttons to navigate through  

channels.

• Press “ ” or “ ” buttons to navigate through the 

programme list.

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   13

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   13

25.03.2010   10:36:03

25.03.2010   10:36:03