LC-32CT2E (serv.man3) - Sharp TV User Guide / Operation Manual. Page 10

English   - 10 -

•You can connect USB devices to your TV by using 

the USB input of the TV. This feature allows you to 
display/play JPG and MP3 fi les stored in a USB 
stick.

• It is possible that certain types of USB devices (e.g. 

MP3 Players) may not be compatible with this TV. 

• You may back up your fi les before making any 

connections to the TV set in order to avoid any 
possible data loss. Note that manufacturer will not 
be responsible for any fi le damage or data loss.

 • Do not pull out USB module while playing a fi le.
• The TV supports only FAT32 disk formatting. NTFS 

format is not supported. If you connect a USB disk 
with NTFS format, “usb is unformatted” osd will 
be displayed.

SIDE VIEW        USB MEMORY

• Plug your USB device to the 

 of the 

TV. See page 9 to locate Side USB Input 2.

• You must switch to analogue TV mode to access 

USB Media Browser screen. Press SOURCE button 
on the remote control until TV item is highlighted. 
Press OK button to switch analogue TV mode. See 
page 25 for more information on Media Browser 
screen.

• If the plugged USB disk is not recognised, please 

reinsert the disk.

• It is recommended that you connect your USB 

device directly to the USB input of the TV. Some 
compatibility problems may occur if you use a 
separate cable connection.

For displaying your computer’s screen image on 
your LCD TV, you can connect your computer to the 
TV set.
• Power off both computer and display before making 

any connections.

• Use 15-pin D-sub display cable to connect a PC to 

the LCD TV.

• When the connection is made, switch to PC source. 

See  “Input selection” section.

• Set the resolution that suits your viewing requirements. 

Resolution information can be found on 

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   10

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   10

25.03.2010   10:35:56

25.03.2010   10:35:56