LC-32CT2E (serv.man3) - Sharp TV User Guide / Operation Manual. Page 16

English   - 16 -

Now pressing “ ” or “ ” buttons moves to the previous/
next character. Pressing “ ” or “ ” buttons toggles the 
current character, i.e., ‘b’ character becomes ‘a’ on  and 
‘c’ on . Pressing the numeric buttons ‘0...9’ replaces the 
highlighted character with the characters printed above 
the key one by one as the button is pressed. 
Press the MENU button to cancel the editing or OK 
button to save the new name.

Channel Locking provides a password-protected 
access to channels selected by parents. 
In order to lock a channel you should know the 
Parental Lock password (default value is set to 
0000 in the factory and can only be changed from the 
Confi guration menu). 
By pressing “ ” or “ ” buttons, highlight the channel 
to be locked and select the “Lock” option by pressing 
“ ” or “ ” buttons. Then press the OK button and a 
password box is displayed:

To set a favourite you should highlight the “Favourites” 
item at the bottom of the Channel List menu. Then 
press  OK button and Edit Favourite List menu 
appears on the screen. 

By pressing “ ” or “ ” buttons, highlight the channel  
that you want to add to the favourite list. By pressing 
OK button, the highlighted channel is added to 
Favourite List. F icon indicates that a channel is added  
to Favourite List.

• Highlight the channel that you want to remove from the 

favourite list and press OK button to remove.You can 
press OK button again to re-adding a channel.

• To activate Favourites, go to the Confi guration menu 

and select Favourite mode. Use “ ” or “ ” to set 
Favourite mode as on. To cancel Favourites, set 
Favourite Mode to Off.

This section is same with the instructions given in 
the General Operations page. Please see Electronic 
Programme Guide (EPG) section in the General 
Operations part.

Press MENU button to display the main menu and 
use the “ ” or “ ” buttons to highlight the “Common 
Interface” line and press OK button. 
It is required to subscribe to a pay channel company 
to view the pay channels of the Digital Terrestrial 
broadcasting.
Obtain the Conditional Access Module (CAM) and 
the viewing card by subscribing to a pay channel 
company, then insert those to the Television using 
the following procedure.
• Switch off the TV and unplug from the mains.
• Insert the CAM, and then the viewing card to the 

slot.

• The CAM should be correctly inserted, it is impossible 

to insert fully if reversed. The CAM or the TV terminal 
may be damaged if the CAM is forcefully inserted.

• Connect the TV to the mains supply, switch on 

and then wait for few moments until the card is 
activated.

• Some CAMs may require the following set up. 

Please set the CAM by entering the DIGITAL TV 
menu, Common Interface then pressing OK button. 
(CAM set up menu is not displayed when it is not 
required.)

•To see the viewing contract information:
• Enter DIGITAL TV; press MENU button, then highlight 

Common Interface and press OK button.

• When no module is inserted, “No Common 

Interface module detected” message appears on 
the screen.

• Refer to the module instruction manual for details 

of the settings.

You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from 
the main menu. Press the MENU button to display 

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   16

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd   16

25.03.2010   10:36:06

25.03.2010   10:36:06