Read Sharp LC-32CT2E (serv.man3) User Guide / Operation Manual online
English - 9 -
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all
1.
the channels that you subscribe to. For more information, see “Common
Interface” section.
Interface” section.
Side USB Input 1.
2.
Important Notice: Side USB Input 1 is for service use only. Note that this
USB connector does not have any other functions such as playing audio or
picture fi les.
USB connector does not have any other functions such as playing audio or
picture fi les.
Side USB input 2 is available in analogue TV mode. You can use Media
3.
Browser screen to browse a connected USB disk.
HDMI 3
4.
: HDMI Input.
Headphone jack is used for connecting an external headphone to the system.
5.
Connect to the HEADPHONE jack to listen to the TV from headphones
(optional).
Video Input is used for connecting video signals of external devices. Connect
(optional).
Video Input is used for connecting video signals of external devices. Connect
6.
the video cable between the VIDEO IN socket on the TV and the VIDEO OUT
jack on your device.
Audio Inputs are used for connecting audio signals of external devices.
jack on your device.
Audio Inputs are used for connecting audio signals of external devices.
7.
Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device. Note: If you connect a device to the TV via the VIDEO INPUT,
you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable
audio.
S-Video
AUDIO OUTPUT jacks on your device. Note: If you connect a device to the TV via the VIDEO INPUT,
you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable
audio.
S-Video
8.
Input is used for connecting an S-VIDEO signal (e.g. from a camcorder or VCR). For using
S-VIDEO input; connect the video cable between the S-VIDEO input on the TV and the S-VIDEO
output on your device. Connect the audio cable between the AUDIO INPUTS (indicated with numb
output on your device. Connect the audio cable between the AUDIO INPUTS (indicated with numb
er 7
in the illustration) on the TV and the audio jacks on your device.
Standby switch is used for turning the TV on or off.
Standby switch is used for turning the TV on or off.
9.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
LAN
EXT 2
EXT 1
SER
V
ICE
SER
VICE
5Vdc-Max500mA
5
Vdc-Max500mA
A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd 9
A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_32883W_10067516_50164256_(V004).indd 9
25.03.2010 10:35:46
25.03.2010 10:35:46
Click on the first or last page to see other LC-32CT2E (serv.man3) service manuals if exist.