Read Sharp LC-26SB25E (serv.man3) Technical Bulletin online
LCD 2009 03 01
Date of Issue: 1
st
March 2009
Classification: Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 3
Sharp Electronics (UK) Limited
Reference – LV290
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
MODELS
LC26SB25E
SYMPTOM When the set is fitted to a VESA compatible wall bracket it has been found that there
is a possibility that there could be an isolation issue between the primary circuit and
the bracket fixings retained within the cabinet back.
the bracket fixings retained within the cabinet back.
CAUSE
Exposed fixing point.
ACTION On units with a serial number before 811118526 please check to see if this modification
has been fitted, if not fit the isolation barrier sheet inside the cabinet back following the
instructions shown in the following pages.
instructions shown in the following pages.
If the unit is still under warranty, please refer to our LCD Television repair company
on UK 0870 787 4837 or Southern Ireland 01 843 4711.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
-
Isolation Barrier
PZETKA496WJZZ
AM
LCD 2009 03 01
Date of Issue: 1
st
March 2009
Classification: Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 2 of 3
Sharp Electronics (UK) Limited
Reference – LV290
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
Figure 1. Inside view of cabinet back and fixing of barrier sheet.
LCD 2009 03 01
Date of Issue: 1
st
March 2009
Classification: Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 3 of 3
Sharp Electronics (UK) Limited
Reference – LV290
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
Figure 2. Secure barrier sheet with Hot Glue at the 6 points shown.
Figure 3.
All sets need to be identified and a white paint mark on the rear cabinet has been used to
All sets need to be identified and a white paint mark on the rear cabinet has been used to
identify units that have already been modified.
