Read Sharp XG-P25XE (serv.man32) User Guide / Operation Manual online
E-20
Setup & Connections
Connecting to a computer using the RS-232C Port
When the RS-232C IN port on the projector is connected to a computer with an RS-232C serial control cable
(cross type, sold separately), the computer can be used to control the projector and check the status of the
projector. See pages
(cross type, sold separately), the computer can be used to control the projector and check the status of the
projector. See pages
70
,
71
and
72
for details.
Connect an RS-232C serial control cable (cross type, sold separately) to the serial port on the computer.
See page
See page
69
for recommended connection of an RS-232C serial control cable.
CAUTION
• Do not connect or disconnect an RS-232C cable to or from the computer while it is on. This may damage your computer.
• RS-232C function may not operate if your computer port is not correctly set up. Please refer to the operation manual of the computer for
details on setting up/installing the correct mouse driver.
Computer
Controlling Projectors
Daisy chain connection
When controlling multiple projectors, or making stack projection using the accompanied Sharp Advanced
Presentation Software Professional Edition, projectors need to be daisy-chained.
Presentation Software Professional Edition, projectors need to be daisy-chained.
RS-232C serial control cable
AN-C10RS
(sold separately)
RS-232C serial control cable
AN-C10RS
(sold separately)
1
2
1
Connect one end of the RS-232C cable to the RS-232C OUT port on the projector.
2
Connect the other end to the RS-232C IN port on another projector.
Click on the first or last page to see other XG-P25XE (serv.man32) service manuals if exist.