Read Sharp XG-P25XE (serv.man32) User Guide / Operation Manual online
E-18
Setup & Connections
Projecting Computer Images
Connecting to a computer using the direct digital input port
3
1
Computer audio cable
2
To digital output terminal
4
To audio output terminal
1
Connect one end of the DVI cable to the INPUT 3 port on the projector.
2
Connect the other end to the corresponding terminal on a computer.
3
To use the built-in audio system, connect one end of the supplied computer audio cable to the AUDIO INPUT 2/
3 terminal on the projector.
3 terminal on the projector.
4
Connect the other end to the audio output terminal on the computer.
• This DVI port is DVI version 1.0 compatible. Therefore when the signal is input from copy guard system compatible (DVI version 2.0)
equipment, no signal will be received.
• The analog RGB signal inputs on the DVI port are only compatible with separate sync.
DVI cable (sold separately)
AN-C3DV
AN-C3DV
Computer
Watching Video Images
Connecting to a VCR, laser disc player and other audiovisual
equipment using the standard video Input
equipment using the standard video Input
S-video cable (sold separately)
Video cable (sold separately)
1
2
Audio cable (sold separately)
To S-video output terminal
To video output terminal
To audio output terminals
VCR
or
Laser disc player
Example
1
Connect the yellow RCA connectors to the corresponding yellow VIDEO INPUT 4 terminal on the projector and
the Video output terminal on the video source.
the Video output terminal on the video source.
2
To use the built-in audio system, connect the red and white RCA connectors to the corresponding red and white
AUDIO INPUT 4/5 terminals on the projector and the Audio output terminals on the video source.
AUDIO INPUT 4/5 terminals on the projector and the Audio output terminals on the video source.
The S-VIDEO INPUT 5 terminal uses a video signal system in which the picture is separated into a color and a luminance signal
to realize a higher-quality image.
to realize a higher-quality image.
• For higher quality video, you may use the S-VIDEO INPUT 5 terminal on the projector. S-video cable is sold separately.
• If your video equipment does not have an S-video output terminal, use a composite video cable.
• If your video equipment does not have an S-video output terminal, use a composite video cable.
CAUTION
• Always turn off the projector before connecting to video equipment, in order to protect both the projector and the equipment
being connected.
Click on the first or last page to see other XG-P25XE (serv.man32) service manuals if exist.