Read Sony DSC-S5000 (serv.man2) Service Manual online
DSC-S5000_ADJ
Sony Corporation
Revision History
SECTION 5
ADJUSTMENT
ADJ
983463951.pdf
2012B08-1
© 2012.02
Published by Sony Techno Create Corporation
Ver. 1.0 2012.02
9-834-639-51
DSC-S5000
Link
• PREPARATIONS
• Adjustment Items When Replacing CCD
Block, Lens Block and Main Board
• List of Service Tools and Equipment
• Keys and Functions
• Connecting the Equipment
• Setting the Adjustment Mode
• CAMERA SECTION ADJUSTMENTS
• Iris/Mechanical Shutter/Bad Pixel
Adjustment
• Zoom Adjustment
• Far Focus Adjustment
• Near Focus Adjustment
• White Balance Adjustment
• Set Language Destination
• PRODUCT ID LIST
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2012.02
Official Release
—
—
DSC-S5000_ADJ
5-2
5. ADJUSTMENT
5-1. PREPARATIONS
5-1-2. List of Service Tools and Equipment
J-5
Small pattern box
PTB-1450
J-6082-557-A
PTB-1450
J-6082-557-A
J-4
J-3
Chart
(Note)
(Note)
J-6
HR 15/51:HR 6 (size AA)
Nickel-Metal Hydride
batteries (× 2)
Nickel-Metal Hydride
batteries (× 2)
Camera table
J-6082-384-A
J-6082-384-A
J-1
J-2
SD-Card
or
SONY
Memory Stick PRO Duo
Memory Stick PRO Duo
(256 MB or more)
Mini flange back jig
J-6082-719-A
J-6082-719-A
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
Infinity jig (1000 mm)
J-6082-747-A
J-6082-747-A
or
or
J-7
Clear chart
For PTB-1450:
J-6082-560-A
For PTB-1450:
J-6082-560-A
Fig. 5-1-1
Note:
For the chart, search “J-6082-563-A” in the JIG & Software on TISS homepage, download the PDF file and print out it on the A4 size whitepaper.
5-1-3. Keys and Functions
Following are keys and functions used in adjustment. (Fig. 5-1-2)
5-1-4. Connecting the Equipment
Insert the SD-Card or Memory Stick PRO Duo and the Nickel-Metal Hydride batteries as shown below. (Fig. 5-1-3)
Note:
Use the fully charged Nickel-Metal Hydride batteries in adjustment.
Set the camera on the Camera table. (Fig. 5-1-4)
5-1-1. Adjustment Items When Replacing CCD Block, Lens Block and Main Board
When replacing these parts, adjust the items indicated by “ z ” in the following table.
Adjustment
Replaced parts
CCD block
Lens block
Main board
Iris/Mechanical Shutter/Bad Pixel
Adjustment
Adjustment
z
z
z
Zoom Adjustment
z
z
Far Focus Adjustment
z
z
Near Focus Adjustment
z
z
White Balance Adjustment
z
z
z
Set Language Destination
z
ON/OFF (Power) button
Shutter button (Key S1)
MENU button
(Delete) button
Control button
button (Key OK)
button (Key Right)
button (Key Up)
button (Key Left)
button (Key Down)
Mode switch
Still image
ON/OFF (Power) lamp
Camera table
(J-6082-384-A)
(J-6082-384-A)
Ensure the notched corner faces correctly.
Fig. 5-1-2
Fig. 5-1-3
Fig. 5-1-4
DSC-S5000_ADJ
5-3
Pressing the MENU button, the adjustment is completed and the initial screen for the adjustments appears.
To continue the adjustment, perform the operations mentioned from the next page.
When all adjustments are completed, press the ON/OFF (Power) button to finish the adjustment operations.
To continue the adjustment, perform the operations mentioned from the next page.
When all adjustments are completed, press the ON/OFF (Power) button to finish the adjustment operations.
5-1-5. Setting the Adjustment Mode
1) Download the firmware file “SDCE550C_[][][]ADJ.zip” from the TISS homepage.
Uncompress the “SDCE550C_[][][]ADJ.zip”, then confirm that it includes the following items.
• SDCE550C.bin
2) Save the uncompressed file “SDCE550C.bin” in the root directory of the SD-Card or Memory Stick PRO Duo after formatting it.
And also save the file of “lang.txt” in the root directory SD-Card or Memory Stick PRO Duo when replacing Main board.
Refer to “5-2-6. Set Language Destination” (Page 5-7) for “lang.txt”.
Note:
Saving it in other directories causes a malfunction of program.
When formatting, perform on the PC, using the FAT. Do not format on the camera.
(If the concealed file “MEMSTICK.IND” is still remained after formatting, delete it.)
When formatting, perform on the PC, using the FAT. Do not format on the camera.
(If the concealed file “MEMSTICK.IND” is still remained after formatting, delete it.)
3) With the camera turned off, set the Mode switch to Still image and insert the SD-Card or Memory Stick PRO Duo with the “SDCE550C.bin”
into the Memory card slot of the camera.
4) While pressing the (Delete) button, press the ON/OFF (Power) button, then release when the ON/OFF (Power) lamp turns on and the Cyber-shot
logo appears on the LCD display.
5) The LCD display will turn white for a moment, and release the (Delete) button when the Cyber-shot logo appears on the LCD display again.
6) After several seconds, the adjustment mode screen appears. (Fig. 5-1-5)
Key OK: WB/ISO Adjust
Key Down: Zoom Adjust
Key Left: Far Focus Adjust
Key Right: Near Focus Adjst
Key Down: Zoom Adjust
Key Left: Far Focus Adjust
Key Right: Near Focus Adjst
Key Up: MS/BP Adjust
Key S1: Set Lang Destination
Fig. 5-1-5
DSC-S5000_ADJ
5-4
5-2. CAMERA SECTION ADJUSTMENTS
5-2-1. Iris/Mechanical Shutter/Bad Pixel Adjustment
The Iris/Mechanical Shutter/Bad Pixel Adjustment order is as follows.
Small pattern box (PTB-1450) setting:
Color temperature = 3150 ± 50K
Luminance: LV12.3 ± 0.2
Color temperature = 3150 ± 50K
Luminance: LV12.3 ± 0.2
Adjustment order
Screen display
The adjustment finished normally.
O ADJUST IRIS OK
O Mshutter OK
O Mshutter OK
O Still Pixel OK
O PreviewPixel OK
The adjustment is complete
The adjustment is finished abnormally.
X ADJUST IRIS NG
O Mshutter OK
O Still Pixel OK
O PreviewPixel OK
Malfunction of Iris adjustment
O PreviewPixel OK
O Still Pixel OK
O Still Pixel OK
O ADJUST IRIS OK
X Mshutter NG
O PreviewPixel OK
O Still Pixel OK
O Still Pixel OK
Malfunction of Mechanical
Shutter adjustment
Shutter adjustment
O ADJUST IRIS OK
X PreviewPixel NG
O Mshutter OK
O Still Pixel OK
Malfunction of Preview Pixel
adjustment
adjustment
Set the camera to the adjustment mode.
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-2-1)
Press the control button “ v (Key Up)”, then Iris/Mechanical Shutter/Bad Pixel Adjustment starts.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-2-3 to 5-2-14)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 5-2-3 to 5-2-14)
In this case, confirm the adjusting environment
and readjust.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
the adjustment completion indication appears
on the screen. (Fig. 5-2-2)
on the screen. (Fig. 5-2-2)
In case of the adjustment is finished normally,
Turn off the power to quit the adjustment mode.
The adjustment is finished abnormally.
O ADJUST IRIS OK
X Still Pixel NG
O Mshutter OK
O PreviewPixel OK
O PreviewPixel OK
Malfunction of Still Pixel adjust-
ment
ment
X ADJUST IRIS NG
O Still Pixel OK
O PreviewPixel OK
X Mshutter NG
Malfunction of Iris & Mechani-
cal Shutter adjustment
cal Shutter adjustment
X PreviewPixel NG
O Mshutter OK
O Still Pixel OK
X ADJUST IRIS NG
Malfunction of Iris & Preview
Pixel adjustment
Pixel adjustment
X Still Pixel NG
O Mshutter OK
O PreviewPixel OK
X ADJUST IRIS NG
Malfunction of Iris & Still Pixel
adjustment
adjustment
X ADJUST IRIS NG
X Mshutter NG
X Mshutter NG
X PreviewPixel NG
O Still Pixel OK
Malfunction of Iris, Mechanical
Shutter & Preview Pixel adjust-
ment
Shutter & Preview Pixel adjust-
ment
X PreviewPixel NG
O Mshutter OK
X ADJUST IRIS NG
X Still Pixel NG
Malfunction of Iris, Preview
Pixel & Still Pixel adjustment
Pixel & Still Pixel adjustment
X ADJUST IRIS NG
O PreviewPixel OK
X Mshutter NG
X Still Pixel NG
Malfunction of Iris, Mechanical
Shutter & Still Pixel adjustment
Shutter & Still Pixel adjustment
X Mshutter NG
X Still Pixel NG
O ADJUST IRIS OK
X PreviewPixel NG
Malfunction of Mechanical
Shutter, Preview Pixel & Still
Pixel adjustment
Shutter, Preview Pixel & Still
Pixel adjustment
X ADJUST IRIS NG
X Mshutter NG
X PreviewPixel NG
X Still Pixel NG
X Mshutter NG
X PreviewPixel NG
X Still Pixel NG
Malfunction of all adjustments
Equipment required: Small pattern box (PTB-1450)
Small pattern box
(PTB-1450)
(PTB-1450)
0.5 to 1.0 cm
Black cloth
Camera
Clear chart
Fig. 5-2-1
Fig. 5-2-2
Fig. 5-2-3
Fig. 5-2-4
Fig. 5-2-5
Fig. 5-2-6
Fig. 5-2-8
Fig. 5-2-10
Fig. 5-2-12
Fig. 5-2-14
Fig. 5-2-11
Fig. 5-2-13
Fig. 5-2-7
Fig. 5-2-9
