Read Sharp XG-P20XE (serv.man20) User Guide / Operation Manual online
Basic Operation
54
• When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
• AUTO cannot be set for PAL-M and PAL-N input signals. Select “PAL-M” or “PAL-N” in “Video System” menu for PAL-M and
PAL-N input signals.
Setting the Video Signal (VIDEO menu only)
The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode
if the selected system mode is not compatible with the connected audiovisual equipment. See page
if the selected system mode is not compatible with the connected audiovisual equipment. See page
44
for the procedure details.
Turning On/Off the On-screen Display
This function allows you to turn on or off the on-screen messages that appear during input select.
See page
See page
44
for the procedure details.
Description
All On-screen Display are displayed.
Input/Custom/Freeze/Enlarge/Auto sync/Volume/Mute/
Black screen functions are not displayed.
Black screen functions are not displayed.
All On-screen Display are not displayed (except Menu/
Button assign list/Lens functions and warning display
(Power off/Temp./Lamp function etc.)).
Button assign list/Lens functions and warning display
(Power off/Temp./Lamp function etc.)).
Selected item
Normal
Level A
Level B
Click on the first or last page to see other XG-P20XE (serv.man20) service manuals if exist.