XG-P20XE (serv.man20). Section 4 Basic Operation - Sharp Projector User Guide / Operation Manual. Page 10

Picture in Picture function allows you to display two pictures on the same screen. You can display the
image input from INPUT 4 or 5 as an inset picture overlapping the main picture input from INPUT 1, 2 or
3.  See page 

 for the procedure details.

You can adjust this setting by accessing the “Button Assign” list on your GyroRemote. Choose popup list “3/5” and
press Function Assign (4). (See page 

)

Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross colour
noise. See page 

 for the procedure details.

• If the image is clear, select “

” to prevent any blurring.

• The image from INPUT 1, 2 or 3 is displayed as the main picture and the image from INPUT 4 or 5 is displayed as the inset picture.
• The last displayed image from INPUT 4 or 5 is displayed as the inset picture.

For example, when you want to display the image from INPUT 4 as the inset picture, select INPUT 4, then select the main picture, and
then select “Pict in Pict”.

• Inset picture can only be displayed in video signal of NTSC/PAL/SECAM.
• When selecting the image for the inset picture, only the images being input will be displayed.
• The audio of the inset picture will come out of the projector’s speakers.
• Picture in Picture does not work in case of the following RGB signals.

UXGA signal image/Interlaced signal/DTV (480P/720P/1080i)

• You can only use the following functions while in Picture in Picture mode.

FREEZE: Works for the inset picture only.

0

1996

1997

1998

1999

50

100

C

150

B

200

A

250

300

Press ß to select “

” to display an inset picture (Factory preset to INPUT 4).

Press ß/©/∂/ƒ to move the inset picture to one of four preset positions.