Read Sharp PAS (serv.man3) Service Manual online
Page 12
PageCounter Administrator Guide
Chapter 3: Manager Mode
Manager Mode allows the System Administrator to configure the PageCounter
terminal for your individual needs.
Overview
Manager Mode can be used to configure advanced PageCounter device options.
Manager Mode menus and prompts are in English regardless of the language selected
in the Equitrac Document Accounting System.
Manager Mode menus and prompts are in English regardless of the language selected
in the Equitrac Document Accounting System.
Manager Mode is active until you manually exit the mode; there is no
automatic time-out.
automatic time-out.
Entering Manager Mode
Upon Initial Startup
If the terminal has not yet been connected to a power source, complete the following
steps to enter Manager Mode:
steps to enter Manager Mode:
1. Connect power to the PageCounter.
2. During the startup sequence of the device, the terminal will display the
message "Loading Firmware." At this time, press the <F2>
Function key under the asterisks on the display.
Function key under the asterisks on the display.
3. You will be prompted to enter a password. The password is 2468.
If you type the password incorrectly, you will see Invalid
Password displayed on the terminal, and you will be prompted
again to enter the password. If you type the password incorrectly
three consecutive times, the terminal will return to the Idle Screen.
Password displayed on the terminal, and you will be prompted
again to enter the password. If you type the password incorrectly
three consecutive times, the terminal will return to the Idle Screen.
4. Use the keypad to enter the password. The password will appear as
asterisks on the display. Use the Function keys below the arrows shown on
the terminal display or the <BACK> key on the keyboard to edit the
password, if needed.
the terminal display or the <BACK> key on the keyboard to edit the
password, if needed.
5. Press
<ENTER>.
Click on the first or last page to see other PAS (serv.man3) service manuals if exist.