Read Sharp MX-PE10 FIERY (serv.man2) Service Manual online
I
NSTALLING
H
ARDWARE
17
Power
• Is a dedicated, grounded electrical outlet for the Fiery Server available near the MFP?
Locate the grounded electrical outlet that will supply power to the Fiery Server. Do not run
the Fiery Server and the MFP on the same circuit. If the customer has provided one, use a
surge suppressor for the Fiery Server.
the Fiery Server and the MFP on the same circuit. If the customer has provided one, use a
surge suppressor for the Fiery Server.
Network
• Make sure that the network is available at the time set for installation.
• Verify with the network administrator that the network is functioning before you attach the
Fiery Server.
• Make sure that the configuration requirements specified in Configuration and Setup
(which is part of the user documentation set) have been met for remote computers and
the network.
the network.
Setting customer expectations
When the site is ready, installation of the Fiery Server takes about one hour. Inform the
customer of the following:
customer of the following:
• Some nodes on the network may be unavailable for up to one hour.
• The MFP may be unavailable for up to one hour.
• The network administrator must be available during the installation for network
connectivity.
Equipment downtime and impact on the network can be minimized if the network
administrator installs a network connector for the Fiery Server and confirms network
functionality with the connector in place before the date scheduled for the Fiery Server
installation.
administrator installs a network connector for the Fiery Server and confirms network
functionality with the connector in place before the date scheduled for the Fiery Server
installation.
• The network administrator must make a networked computer available during the
installation. The appropriate software must be installed in advance. Documentation for
the networked computer and network operating software should be available.
the networked computer and network operating software should be available.
• The network administrator must install the user software shipped with the Fiery Server
onto networked Windows and Mac OS computers that print to the Fiery Server (user
documentation is also included).
documentation is also included).
N
OTE
:
This document covers hardware installation and service and provides general
information about connecting the Fiery Server to the customer’s network. Network Setup and
configuration information exceeds the scope of this document. For Network Setup and
configuration information, refer the network administrator to Configuration and Setup, which
is part of the user documentation set.
configuration information exceeds the scope of this document. For Network Setup and
configuration information, refer the network administrator to Configuration and Setup, which
is part of the user documentation set.
Click on the first or last page to see other MX-PE10 FIERY (serv.man2) service manuals if exist.